Nexperia 74HC123D,652 2 Flip Flop IC HC, 16-Pin SOIC
- RS-stocknr.:
- 103-8170
- Fabrikantnummer:
- 74HC123D,652
- Fabrikant:
- Nexperia
Momenteel niet beschikbaar
We weten niet of dit item nog op voorraad komt, RS is van plan dit binnenkort uit ons assortiment te halen.
- RS-stocknr.:
- 103-8170
- Fabrikantnummer:
- 74HC123D,652
- Fabrikant:
- Nexperia
Specificaties
Datasheets
Wetgeving en compliance
Productomschrijving
Zoek vergelijkbare producten door een of meer kenmerken te selecteren.
Alles selecteren | Attribuut | Waarde |
|---|---|---|
| Merk | Nexperia | |
| Product Type | Flip Flop IC | |
| Logic Family | HC | |
| Input Type | Edge Triggered | |
| Mount Type | Surface | |
| Package Type | SOIC | |
| Minimum Supply Voltage | 2V | |
| Pin Count | 16 | |
| Maximum Supply Voltage | 6V | |
| Trigger Type | Dual Retriggerable Monostable | |
| Maximum Propagation Delay Time @ CL | 65ns | |
| Minimum Operating Temperature | -40°C | |
| Flip-Flop Type | Monostable Multivibrator | |
| Maximum Operating Temperature | 125°C | |
| Number of Elements per Chip | 2 | |
| Standards/Approvals | No | |
| Height | 1.45mm | |
| Length | 10mm | |
| Automotive Standard | No | |
| Alles selecteren | ||
|---|---|---|
Merk Nexperia | ||
Product Type Flip Flop IC | ||
Logic Family HC | ||
Input Type Edge Triggered | ||
Mount Type Surface | ||
Package Type SOIC | ||
Minimum Supply Voltage 2V | ||
Pin Count 16 | ||
Maximum Supply Voltage 6V | ||
Trigger Type Dual Retriggerable Monostable | ||
Maximum Propagation Delay Time @ CL 65ns | ||
Minimum Operating Temperature -40°C | ||
Flip-Flop Type Monostable Multivibrator | ||
Maximum Operating Temperature 125°C | ||
Number of Elements per Chip 2 | ||
Standards/Approvals No | ||
Height 1.45mm | ||
Length 10mm | ||
Automotive Standard No | ||
- Land van herkomst:
- TH
The 74HC123, 74HCT123 are high-speed Si-gate CMOS devices and are pin compatible with Low-power Schottky TTL (LSTTL). The 74HC123, 74HCT123 are dual retriggerable monostable multivibrators with output pulse width control by three methods: The basic pulse is programmed by selection of an external resistor (REXT) and capacitor (CEXT). Once triggered, the basic output pulse width may be extended by retriggering the gated active LOW-going edge input (nA) or the active HIGH-going edge input (nB). By repeating this process, the output pulse period (nQ = HIGH, nQ = LOW) can be made as long as desired.
Simple control interface
Power on reset
Dual devices with separate reset inputs
Negative or positive edge triggered
CMOS low power
Key applications
Timing delays in control circuits