Festo SFAB Series Flow Sensor Flow Sensor for Air, 0.1L/min Min, 10L/min Max

RS-stocknr.:: 288-8222
Fabrikantnummer:: SFAB-10U-WQ6-2SA-M12
Fabrikant:: Festo

Festo SFAB Series Flow Sensor Flow Sensor for Air, 0.1L/min Min, 10L/min Max

Informatie over voorraden is momenteel niet toegankelijk

Alternatief

Dit product is momenteel niet beschikbaar. Hierbij onze aanbeveling voor een alternatief product.

Festo SFAB Series Flow Rate Monitoring Sensor Flow Sensor for Air, 0.1L/min Min, 10L/min Max

RS-stocknr.: 343-110

Per stuk

€ 409,51

(excl. BTW)

€ 495,51

(incl. BTW)

RS-stocknr.:: 288-8222
Fabrikantnummer:: SFAB-10U-WQ6-2SA-M12
Fabrikant:: Festo

Specificaties

Datasheets

Wetgeving en compliance

Productomschrijving

Zoek vergelijkbare producten door een of meer kenmerken te selecteren.

Alles selecteren	Attribuut	Waarde
	Merk	Festo
	Product Type	Flow Sensor
	Media Monitored	Air
	Device Type	Flow Sensor
	Minimum Flow Rate	0.1L/min
	Maximum Flow Rate	10L/min
	Housing Material	Reinforced Polyamide
	Connection Type	Plug
	Maximum Pressure	10bar
	Minimum Media Temperature	0°C
	Maximum Supply Voltage	30V
	IP Rating	IP65
	Maximum Media Temperature	50°C
	Minimum Operating Temperature	0°C
	Maximum Operating Temperature	50°C
	Series	SFAB
	Standards/Approvals	CE mark, UL E322346, To EU EMC Directive, To UK RoHS instructions, To UK instructions for EMC, RCM trademark c UL us - Recognised (OL), CE, In accordance with EU RoHS Directive
	Current Rating	120mA
	Model Number	565387

	Alles selecteren
	Merk Festo
	Product Type Flow Sensor
	Media Monitored Air
	Device Type Flow Sensor
	Minimum Flow Rate 0.1L/min
	Maximum Flow Rate 10L/min
	Housing Material Reinforced Polyamide
	Connection Type Plug
	Maximum Pressure 10bar
	Minimum Media Temperature 0°C
	Maximum Supply Voltage 30V
	IP Rating IP65
	Maximum Media Temperature 50°C
	Minimum Operating Temperature 0°C
	Maximum Operating Temperature 50°C
	Series SFAB
	Standards/Approvals CE mark, UL E322346, To EU EMC Directive, To UK RoHS instructions, To UK instructions for EMC, RCM trademark c UL us - Recognised (OL), CE, In accordance with EU RoHS Directive
	Current Rating 120mA
	Model Number 565387

Land van herkomst:: BG

Festo SFAB Series Flow Sensor, 10L/min Maximum Flow Rate, IP65 - SFAB-10U-WQ6-2SA-M12, Numeric Part Number:565387

This flow sensor measures volumetric flow of compressed Air and nitrogen within pneumatic systems using a thermal heat-loss principle. It is intended for inline measurement where a compact, plug-connected device provides direct numeric readouts and status switching for control tasks in automation, electronics and mechanical installations.

Features & Benefits

• Measures 0.1 to 10 L/min for precision low-flow control
• Two switchable PNP/NPN outputs support direct logic interfacing
• 4 to 20 mA analogue output enables proportional signalling to controllers
• IP65 rated reinforced polyamide housing resists ingress in washdown areas
• Operates from DC 15V to 30V with 120 mA supply current for standard systems
• Withstands operating pressures up to 10 bar for pneumatic robustness

Applications

• Suitable for monitoring leak-test stations in production lines
• Ideal for flow feedback in pneumatic valve control loops
• Used with compressed-air conditioning systems for flow balancing
• Can be used for inline measurement in lab gas-supply set-ups

How is the unit electrically connected on-site?

It uses a 5-core M12x1 A-coded plug connection compatible with common industrial cabling and includes reverse-polarity protection on all electrical connections.

How does the display support commissioning and checks?

An illuminated multi-colour LCD shows selectable units (l, l/h, l/min, m3, scf, scfm) and allows teach-in setup and PIN protection for tamper prevention.

What accuracy and stability can be expected during operation?

Typical accuracy is ±(3% of measured Value + 0.3% FS) with repetition offset 0.2% FS and span repeatability 0.8% FS, and a temperature coefficient of about 0.1% FS/K.

How is the sensor mounted and connected pneumatically?

It mounts via through-holes, H-rail or wall bracket and accepts tubing with 6mm outside diameter for the process connection.

What protections support electrical reliability?

The device includes short-circuit and overload protection, and switching outputs can be configured as normally open or normally closed for flexible integration.