- RS-stocknr.:
- 780-0119
- Fabrikantnummer:
- LFS-01
- Fabrikant:
- Sensata / Cynergy3
4 op voorraad - levertijd is 1 werkdag(en).
Toegevoegd
Prijs Per stuk
€ 381,54
(excl. BTW)
€ 461,66
(incl. BTW)
Aantal stuks | Per stuk |
1 + | € 381,54 |
- RS-stocknr.:
- 780-0119
- Fabrikantnummer:
- LFS-01
- Fabrikant:
- Sensata / Cynergy3
Wetgeving en compliance
- Land van herkomst:
- TW
Productomschrijving
Sensata Cynergy3 Vertical Paddle Flow Switch, 1A, 20 Bar - LFS Series - LFS-01
Use this paddle flow switch from Sensata Cynergy3 to accurately control the flow of substances in a pipe. The vertically mounted flow sensor's electrical connections convey a trip motion to a pump to adjust flow rates that are too high or too low. The switch's paddle is constructed from high-grade stainless steel, which is highly corrosion-resistant and able to withstand the abrasive effects of harsh chemicals. It's suitable for flow detection in pipes with a bore size of 1in to 3in, such as those found in emergency sprinkler systems.
Features & Benefits
• Aluminium alloy housing to prevent rust and extend the unit's service life
• IP65 (ingress protection) rating means the float's electrical connections are protected from dirt and moisture
• High maximum operating pressure of 20 bar for use in heavy-duty applications
• Supplied with a cable gland for making quick and secure electrical connections
• IP65 (ingress protection) rating means the float's electrical connections are protected from dirt and moisture
• High maximum operating pressure of 20 bar for use in heavy-duty applications
• Supplied with a cable gland for making quick and secure electrical connections
Where do you install a flow switch in a pipe?
You should place this switch where there's a straight run in a pipe on either side of the switch. As it's a vertical sensor, it needs to be installed in a pipe with an upward flow direction.
Specificaties
Kenmerk | Waarde |
---|---|
Device Type | Paddle |
Minimum Flow Rate | 15.2 l/min, 19 l/min |
Maximum Flow Rate | 60.6 L/min, 83.3 L/min |
Supply Voltage | 230 V |
Pipe Diameter Range | 1 → 3 in |
Connection Type | 1 NPT |
Maximum Pressure | 20bar |
Material | Aluminium Alloy |
Minimum Operating Temperature | -30°C |
Series | LFS |
Maximum Operating Temperature | +75°C |
Current Rating | 1 A |
- RS-stocknr.:
- 780-0119
- Fabrikantnummer:
- LFS-01
- Fabrikant:
- Sensata / Cynergy3