Cynergy3 FSP10 Series In-line Flow Switch for Liquid, 3L/min Min, 80L/min Max

RS-stocknr.:: 780-0273
Fabrikantnummer:: FSP10A30
Fabrikant:: Cynergy3

Cynergy3 FSP10 Series In-line Flow Switch for Liquid, 3L/min Min, 80L/min Max

Subtotaal (1 eenheid)*

€ 153,96

(excl. BTW)

€ 186,29

(incl. BTW)

GRATIS bezorging voor bestellingen van meer dan € 90,00

Op voorraad

3 stuk(s) klaar voor verzending
Plus verzending 9 stuk(s) vanaf 01 oktober 2026

Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.

Aantal stuks	Per stuk
1 +	€ 153,96

*prijsindicatie

RS-stocknr.:: 780-0273
Fabrikantnummer:: FSP10A30
Fabrikant:: Cynergy3

Specificaties

Datasheets

Wetgeving en compliance

Productomschrijving

Zoek vergelijkbare producten door een of meer kenmerken te selecteren.

Alles selecteren	Attribuut	Waarde
	Merk	Cynergy3
	Product Type	Flow Switch
	Media Monitored	Liquid
	Device Type	In-line
	Minimum Flow Rate	3L/min
	Housing Material	Polyamide, Brass
	Maximum Flow Rate	80L/min
	Connection Type	1 in BSP
	Maximum Pressure	8bar
	Maximum Supply Voltage	250V ac
	Minimum Media Temperature	-30°C
	IP Rating	IP54
	Maximum Media Temperature	85°C
	Minimum Operating Temperature	85°C
	Maximum Operating Temperature	85°C
	Standards/Approvals	ISO9001 CERTIFIED
	Series	FSP10
	Current Rating	10A

	Alles selecteren
	Merk Cynergy3
	Product Type Flow Switch
	Media Monitored Liquid
	Device Type In-line
	Minimum Flow Rate 3L/min
	Housing Material Polyamide, Brass
	Maximum Flow Rate 80L/min
	Connection Type 1 in BSP
	Maximum Pressure 8bar
	Maximum Supply Voltage 250V ac
	Minimum Media Temperature -30°C
	IP Rating IP54
	Maximum Media Temperature 85°C
	Minimum Operating Temperature 85°C
	Maximum Operating Temperature 85°C
	Standards/Approvals ISO9001 CERTIFIED
	Series FSP10
	Current Rating 10A

Land van herkomst:: CN

Sensata Cynergy3 In-Line Flow Switch, 10A, 250V AC - FSP10 Series - FSP10A30

This in-line flow switch from Sensata Cynergy3 directly controls an electric pump. It's used in gravity-fed systems to increase the pressure or flow of water. Its brass tube is strong and corrosion-resistant for a durable, long-lasting connection to a pipe. As it automatically starts a pump when the flow rate exceeds 3L/min (litres per minute), there's no need for manual intervention, making it simple to use. When water demand recedes or a tank empties, it turns the pump off. You'll find switches like this one used in irrigation and plumbing systems.

Features & Benefits

• Polyamide (PA) housing that's resistant to wear for an extended service life

• IP54 (ingress protection) rating for protection against dust and water splashes from any direction

• Supplied with electrical terminations for convenient installation

Where should I mount this flow switch?

You should install this in-line flow switch in a pipe directly above the pump. As its operation relies upon water flowing against gravity, you should mount it vertically with the flow direction upward.

How do I know if the switch is working properly?

You can check the function of the switch by using the test button that's located underneath the device.