Schurter Mounting Bracket Fuseholder Cap

  • RS-stocknr. 876-7818
  • Fabrikantnummer 0697.9201
  • Fabrikant Schurter
Datasheets
Wetgeving en compliance
Conform
Land van herkomst: US
Productomschrijving

Schurter Fuseholder Mounting Accessories

Schurter Fuse Clips can be used in conjunction with schurter fuses to provide primary protection for electronic circuits. Fuse clips are available in a different mounting styles including solder and screw.

Panel Mounting

CATEGORIES OF PROTECTION AGAINST ELECTRIC SHOCK,PC1: No integral protection against electric shock. If required, designers must provide additional protection against electric shock on equipment.,PC2: With integral protection against electric shock. Fuse-holders shall have live parts inaccessible to IEC529 standard test finger, when fully assembled, without fuse carrier or fuse in place and when fuse carrier, with fuse is being inserted or withdrawn.,PC3: With integral protection against electric shock. Fuse-holders shall have live parts inaccessible to IEC529 1mm diameter rigid test wire when fully assembled, without fuse carrier or fuse in place and when fuse carrier, with fuse is being inserted or withdrawn.

Specificaties
Kenmerk Waarde
Fuse Holder Accessory Type Fuseholder Cap
Series 697
tijdelijk niet op voorraad – nieuwe voorraad verwacht op 26-01-2021, met een levertijd van 2 à 3 werkdagen.
Prijs Each (In a Pack of 100)
0,204
(excl. BTW)
0,247
(incl. BTW)
Aantal stuks
Per stuk
Per pak*
100 +
€ 0,204
€ 20,40
*prijsindicatie
Related Products
These high-quality RS Pro fuse holders and mounting ...
Description:
These high-quality RS Pro fuse holders and mounting brackets have been approved to excellent standards and designed to meet a wide range of application requirements.Areas that benefit from these types of accessories include power distribution, motor protection, electronic railway and ...
Adaptor for mounting A1 (NIT) & F1 (NS) ...
Description:
Adaptor for mounting A1 (NIT) & F1 (NS) fuseholders onto symmetric DIN rail (top hat profile) to B.S. 5594:1978 (stock nos. 413-901 & 415-064 ). Fuseholder snap-fits on and off DIN-rail.
Schurter FEC series panel mount fuse holders for ...
Description:
Schurter FEC series panel mount fuse holders for 5 x 20 or 6.3 x 32 mm cartridge fuses. The FEC series have quick connect terminals and area available with a finger grip or slotted cap. For appliances in unattended useLow ...
The Schurter 40mm plug-on lead cap, with pigtail, ...
Description:
The Schurter 40mm plug-on lead cap, with pigtail, has silver-plated contacts. It has a 5mm x 20mm fuse holder, which supports soldering onto the printed circuit. It is a PCB through-hole mount fuse holder. This tube fuse solution is ideal ...