Eaton 63A Fuse Holder, 1P-Pole for 49 mm, 500V
- RS-stocknr.:
- 262-575
- Fabrikantnummer:
- SFPRD33
- Fabrikant:
- Eaton
Subtotaal (1 verpakking van 30 eenheden)*
€ 579,43
(excl. BTW)
€ 701,11
(incl. BTW)
GRATIS bezorging voor bestellingen van meer dan € 90,00
Voorradig bij de fabrikant
- Klaar voor verzending vanaf 29 juni 2026
Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.
Verpakking(en) | Per verpakking | Per stuk* |
|---|---|---|
| 1 + | € 579,43 | € 19,314 |
*prijsindicatie
- RS-stocknr.:
- 262-575
- Fabrikantnummer:
- SFPRD33
- Fabrikant:
- Eaton
Specificaties
Datasheets
Wetgeving en compliance
Productomschrijving
Zoek vergelijkbare producten door een of meer kenmerken te selecteren.
Alles selecteren | Attribuut | Waarde |
|---|---|---|
| Merk | Eaton | |
| Product Type | Fuse Holder | |
| Current Rating | 63A | |
| Voltage | 500V | |
| Number of Poles | 1 | |
| Compatible Fuse Size | 49 mm | |
| Standards/Approvals | IEC, UKCA, CE | |
| Series | Eaton Bussmann | |
| Alles selecteren | ||
|---|---|---|
Merk Eaton | ||
Product Type Fuse Holder | ||
Current Rating 63A | ||
Voltage 500V | ||
Number of Poles 1 | ||
Compatible Fuse Size 49 mm | ||
Standards/Approvals IEC, UKCA, CE | ||
Series Eaton Bussmann | ||
- Land van herkomst:
- SI
Eaton Fuse Holder, 63A Current Rating, 500V Voltage - SFPRD33
This fuse holder provides a single-circuit housing for low-voltage overcurrent protection in industrial electrical systems. Designed for panel or equipment installation, it accepts a replaceable cartridge to facilitate service and maintenance while operating at system voltages common to automation and power distribution environments.
Features & Benefits
• Rated for 63A continuous current to handle high-load circuits
• Supports up to 500V enabling use on elevated control voltages
• Single-pole configuration simplifies single-phase protection schemes
• Conforms to IEC standards for recognised international compatibility
• Recognised with UKCA and CE markings for regional regulatory acceptance
• Supports up to 500V enabling use on elevated control voltages
• Single-pole configuration simplifies single-phase protection schemes
• Conforms to IEC standards for recognised international compatibility
• Recognised with UKCA and CE markings for regional regulatory acceptance
**Applications**
• Suitable for panel mount protection in control cabinets
• Ideal for single-phase motor supply circuits in automation systems
• Used for protection of distribution lines up to 500V in factories
• Can be used for replaceable fuse installations requiring 63A capacity
• Ideal for single-phase motor supply circuits in automation systems
• Used for protection of distribution lines up to 500V in factories
• Can be used for replaceable fuse installations requiring 63A capacity
What current capacity does it support for sustained operation?
It is specified for continuous operation at 63A, appropriate for circuits drawing near that current rating.
Which voltage levels can it be connected to within installations?
It is intended for use on systems with nominal voltages up to 500V, covering many industrial control and distribution voltages.
How many poles does the unit provide for circuit isolation?
The design provides a single pole, offering isolation for one conductor in single-phase arrangements.
Which conformity marks indicate regional and international acceptance?
It carries IEC conformity Plus UKCA and CE markings to align with recognised standards and regional requirements.
Is the fuse element replaceable in situ?
The product accepts a replaceable fuse cartridge, enabling straightforward replacement without a full unit swap.