Wickmann 16 A Cap for 6.3 x 32 mm, 25 V

RS-stocknr.:: 360-7244
Artikelnummer Distrelec:: 304-41-730
Fabrikantnummer:: 81500000005
Fabrikant:: Wickmann

Subtotaal (1 verpakking van 5 eenheden)*

€ 11,12

(excl. BTW)

€ 13,455

(incl. BTW)

GRATIS bezorging voor bestellingen van meer dan € 75,00

Op voorraad

50 stuk(s) klaar voor verzending

Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.

Aantal stuks	Per stuk	Per verpakking*
5 +	€ 2,224	€ 11,12

*prijsindicatie

RS-stocknr.:: 360-7244
Artikelnummer Distrelec:: 304-41-730
Fabrikantnummer:: 81500000005
Fabrikant:: Wickmann

Specificaties

Datasheets

Wetgeving en compliance

Productomschrijving

Zoek vergelijkbare producten door een of meer kenmerken te selecteren.

Alles selecteren	Attribuut	Waarde
	Merk	Wickmann
	Product Type	Cap
	Current Rating	16 A
	Voltage	25 V
	Body Material	Polyamide 66, Black Thermoplastic
	IP Rating	IP40
	Compatible Fuse Size	6.3 x 32 mm
	Minimum Operating Temperature	-25°C
	Maximum Operating Temperature	70°C
	Standards/Approvals	UL 512, CSA C22.2. No.39, IEC 60127-6
	Cap Style	Slotted
	Terminal Type	Solder
	Series	800
	Contact Material	Copper Alloy
	Protection Category	PC2

	Alles selecteren
	Merk Wickmann
	Product Type Cap
	Current Rating 16 A
	Voltage 25 V
	Body Material Polyamide 66, Black Thermoplastic
	IP Rating IP40
	Compatible Fuse Size 6.3 x 32 mm
	Minimum Operating Temperature -25°C
	Maximum Operating Temperature 70°C
	Standards/Approvals UL 512, CSA C22.2. No.39, IEC 60127-6
	Cap Style Slotted
	Terminal Type Solder
	Series 800
	Contact Material Copper Alloy
	Protection Category PC2

'WICKMANN' Shocksafe, Panel mount

One complete fuse holder body system requires one holder body and one cap of the appropriate size.,Maximum current 10A @ 250V (6·3x32mm), 6·3A @ 250V (5x20mm)

Protection to PC2

Polyamide Body, depth behind panel 42mm

Panel Mounting

CATEGORIES OF PROTECTION AGAINST ELECTRIC SHOCK,PC1: No integral protection against electric shock. If required, designers must provide additional protection against electric shock on equipment.,PC2: With integral protection against electric shock. Fuse-holders shall have live parts inaccessible to IEC529 standard test finger, when fully assembled, without fuse carrier or fuse in place and when fuse carrier, with fuse is being inserted or withdrawn.,PC3: With integral protection against electric shock. Fuse-holders shall have live parts inaccessible to IEC529 1mm diameter rigid test wire when fully assembled, without fuse carrier or fuse in place and when fuse carrier, with fuse is being inserted or withdrawn.

Note

5x20mm cap goes with fuse holder 360-7238

Approvals

VDE, SEMKO, UL, CSA