440E Cable Switch with E-Stop, Straight, 2m, NO/NC

Datasheets
Wetgeving en compliance
N.v.t.
Land van herkomst: DO
Productomschrijving

Lifeline 4, Hazardous Area

Designed to meet the latest standard for emergency stop equipment, EN418 and is suitable for Zone 1 & 2 environments
Can be installed along or around awkward machinery such as conveyors and provides a constant access emergency stop facility
Status indicator makes the system easy to set-up and maintain for spans up to 75 metres
The positive mode mechanism ensures that the contacts are immediately latched open on actuation and can only be reset by the intentional action of turning the blue reset knob
The design also protects against nuisance tripping and the effects of thermal expansion
A mushroom head emergency stop button is included on the unit to provide total E-stop access even at the extreme ends of the span and is sealed to IP66
Rugged construction using die cast alloy and stainless steel to withstand harsh conditions
2 of the 3 cable access points are sealed to meet Ex. spec
Cable access is therefore restricted to one point of ingress, underside entry
Approval Certificate available on request

Note

Our rope switch kits contain all fittings necessary for installation. Available in 5, 10, 20, 30, 50 and 75 metre lengths.
Stock No typ. 366-3878 & 239-6757

Specificaties
Kenmerk Waarde
Range LIFELINE 4
Series 440E
Reset Button Yes
Normal State Configuration NO/NC
Mounting Orientation Straight
Maximum Rope Span 2m
Maximum Current 6 A ac, 7 A dc
Maximum AC Voltage 600V
Maximum DC Voltage 250V
Housing Material Brass, Stainless Steel
Size of Cable Entries M20
Depth 85mm
Minimum Operating Temperature -25°C
Hazardous Area Certification ATEX
Maximum Operating Temperature +70°C
Dimensions 229.5 x 69 x 85 mm
Width 69mm
E-Stop Button Yes
IP Rating IP66
Length 229.5mm
1 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
5 op voorraad - levertijd is 2 werkdag(en) (UK-voorraad)
Prijs Each
415,00
(excl. BTW)
502,15
(incl. BTW)
Aantal stuks
Per stuk
1 +
€ 415,00
Related Products
The Telemecanique Sensors XY2-CH-series emergency stop rope pull ...
Description:
The Telemecanique Sensors XY2-CH-series emergency stop rope pull switch has a 1NO/2NC contact configuration. It has Zamak housing and has a straight mount orientation. The maximum AC and DC voltage is 240VAC and 250VDC respectively and the current rating of ...
The ER series of safety rope pull switches ...
Description:
The ER series of safety rope pull switches from Omron are designed to be tough and durable for even the most demanding applications. With long coverage spans, rope pull switches eliminate the need for numerous E-stop buttons reducing installation time ...
The Guardian Line GLS from IDEM are safety ...
Description:
The Guardian Line GLS from IDEM are safety rope pull switches with a robust yellow diecast housing that provide a general purpose safety solution and offer a choice of fittings depending on the application. They are designed to be mounted ...
The IDEM GLM series safety rope pull cable ...
Description:
The IDEM GLM series safety rope pull cable switch has 2NO/2NC contact configuration. It is compact, robust yellow and has die-cast housing that protects short conveyor lengths of up to 50m and offer a choice of fittings depending on the ...