Honeywell Technologies Hall Effect Sensor Snap-in, Digital Current Sinking (Open Collector) Output, Block Body, 30 V 30V

RS-stocknr.:: 169-7671
Fabrikantnummer:: SR15C-A3
Fabrikant:: Honeywell

Honeywell Technologies Hall Effect Sensor Snap-in, Digital Current Sinking (Open Collector) Output, Block Body, 30 V 30V

Subtotaal (1 zak van 100 eenheden)*

€ 1.839,40

(excl. BTW)

€ 2.225,70

(incl. BTW)

GRATIS bezorging voor bestellingen van meer dan € 90,00

Tijdelijk niet op voorraad

Verzending 100 stuk(s) vanaf 30 november 2026

Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.

Aantal stuks	Per stuk	Per Zak*
100 +	€ 18,394	€ 1.839,40

*prijsindicatie

RS-stocknr.:: 169-7671
Fabrikantnummer:: SR15C-A3
Fabrikant:: Honeywell

Specificaties

Datasheets

Wetgeving en compliance

Productomschrijving

Zoek vergelijkbare producten door een of meer kenmerken te selecteren.

Alles selecteren	Attribuut	Waarde
	Merk	Honeywell
	Output Type	Digital Current Sinking (Open Collector)
	Product Type	Hall Effect Sensor
	Body Style	Block
	Terminal Type	Wire Lead
	Mount Type	Snap-in
	Maximum DC Voltage	30V
	Switching Current	20mA
	Maximum Supply Voltage	30V dc
	Minimum Operating Temperature	-40°C
	Depth	5.1mm
	Series	SR15
	Width	20.3mm
	Standards/Approvals	No
	Length	7.6mm
	Maximum Operating Temperature	150°C
	Housing Material	Plastic

	Alles selecteren
	Merk Honeywell
	Output Type Digital Current Sinking (Open Collector)
	Product Type Hall Effect Sensor
	Body Style Block
	Terminal Type Wire Lead
	Mount Type Snap-in
	Maximum DC Voltage 30V
	Switching Current 20mA
	Maximum Supply Voltage 30V dc
	Minimum Operating Temperature -40°C
	Depth 5.1mm
	Series SR15
	Width 20.3mm
	Standards/Approvals No
	Length 7.6mm
	Maximum Operating Temperature 150°C
	Housing Material Plastic

SR13/15 Series Position Sensors

Vrijgesteld

Land van herkomst:: MX

Honeywell SR15 Series Hall Effect Sensor, 30V Maximum Supply Voltage, 20mA Switching Current - SR15C-A3

This Hall effect sensor provides non-contact magnetic switching for industrial sensing tasks, designed for through-hole snap-in mounting in assemblies requiring a Compact block-style package. It operates from a single supply and produces a digital sinking output suitable for interfacing with logic and control circuits in automation and electronic equipment.

Features and Benefits:

• Maximum supply voltage 30V supports varied system voltages • Output configured as digital current sinking for simple interfacing • Switching current 20mA enables direct drive of low-current loads • Rated operating range -40°C to 150°C for wide thermal environments • Plastic housing delivers electrical insulation and reduced weight

Applications

• Suitable for detecting position in motor-control assemblies • Ideal for use in proximity sensing on production equipment • Used for wheel-speed or rotor-position sensing in vehicular modules • Can be used for magnetic limit switching in panel-mounted devices

What mounting method is used for mechanical retention?

It employs a snap-in mount that secures the device through its housing for straightforward through-hole installation.

How does the Terminal configuration affect wiring options?

The device uses wire leads for connection, allowing flexible routing and soldered or crimp terminations in wiring looms.

What electrical environment limits should be observed?

Do not exceed 30V DC supply or the specified maximum switching current of 20mA to avoid overstress.

How does the package shape influence panel integration?

The Block body form factor with shallow depth facilitates tight packing on assemblies where frontal clearance is limited.