Transcend M.2 1 TB Internal SSD
- RS-stocknr.:
- 682-749
- Fabrikantnummer:
- TS1TMTS960T-VS1
- Fabrikant:
- Transcend
Subtotaal (1 eenheid)*
€ 693,48
(excl. BTW)
€ 839,11
(incl. BTW)
GRATIS bezorging voor bestellingen van meer dan € 90,00
Op voorraad
- 1 stuk(s) klaar voor verzending vanaf een andere locatie
Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.
Aantal stuks | Per stuk |
|---|---|
| 1 + | € 693,48 |
*prijsindicatie
- RS-stocknr.:
- 682-749
- Fabrikantnummer:
- TS1TMTS960T-VS1
- Fabrikant:
- Transcend
Specificaties
Datasheets
Wetgeving en compliance
Productomschrijving
Zoek vergelijkbare producten door een of meer kenmerken te selecteren.
Alles selecteren | Attribuut | Waarde |
|---|---|---|
| Merk | Transcend | |
| Product Type | SSD | |
| Memory Size | 1TB | |
| Sub Type | SSD | |
| Internal/External | Internal | |
| Form Factor | M.2 | |
| Industrial Grade | Yes | |
| NAND Type | 3D | |
| Interface Type | SATA III 6 Gb/S | |
| Maximum Operating Temperature | 75°C | |
| Minimum Operating Temperature | -20°C | |
| Length | 80mm | |
| Width | 22mm | |
| Standards/Approvals | UKCA | |
| Height | 3.58mm | |
| Alles selecteren | ||
|---|---|---|
Merk Transcend | ||
Product Type SSD | ||
Memory Size 1TB | ||
Sub Type SSD | ||
Internal/External Internal | ||
Form Factor M.2 | ||
Industrial Grade Yes | ||
NAND Type 3D | ||
Interface Type SATA III 6 Gb/S | ||
Maximum Operating Temperature 75°C | ||
Minimum Operating Temperature -20°C | ||
Length 80mm | ||
Width 22mm | ||
Standards/Approvals UKCA | ||
Height 3.58mm | ||
Transcend SSD, 1TB Storage Capacity, M.2 Form Factor - TS1TMTS960T-VS1
This internal SSD is designed for industrial environments where compact, high-capacity storage is required. It fits into M.2 slots and provides solid-state storage suitable for embedded and automation equipment, delivering fast data access via a SATA III 6Gb/s Interface while operating across a wide temperature range.
Features and Benefits:
• 1TB capacity for large on-board datasets and logs
• 3D NAND technology for dense flash storage and endurance
• SATA III 6Gb/s Interface for consistent throughput in legacy hosts
• Operates up to 75°C to withstand high-temperature installations
• Works from -20°C to support cold-start conditions
• UKCA approved for deployment within UK regulatory frameworks
• 3D NAND technology for dense flash storage and endurance
• SATA III 6Gb/s Interface for consistent throughput in legacy hosts
• Operates up to 75°C to withstand high-temperature installations
• Works from -20°C to support cold-start conditions
• UKCA approved for deployment within UK regulatory frameworks
Applications
• Suitable for industrial controllers in automation systems
• Ideal for data logging in electrical and electronics assemblies
• Used with embedded computing modules in mechanical equipment
• Can be used for firmware storage in control and monitoring units
• Ideal for data logging in electrical and electronics assemblies
• Used with embedded computing modules in mechanical equipment
• Can be used for firmware storage in control and monitoring units
How is the module form factor relevant to hardware integration?
Its M.2 form factor and 80mm length allow direct mounting on motherboards and carrier boards designed for M.2 2280 devices, reducing cabling and saving panel space.
What makes it appropriate for harsh operating environments?
The specified maximum operating temperature of 75°C and minimum of -20°C enable operation in elevated thermal conditions and sub-zero starts common in industrial settings.
Which Interface is required on host systems for compatibility?
Hosts must provide an M.2 slot wired for SATA signalling supporting the SATA III 6Gb/s protocol to communicate with the device.
What physical profile should be considered during mechanical design?
The module has a width of 22mm and a height of 3.58mm, so enclosures and standoffs must accommodate a low-profile M.2 card.
Is this storage classified for industrial use and how is that indicated?
It is designated as industrial grade and carries UKCA marking, signifying suitability for industrial deployments within the UK.