Transcend M.2 256 MB Internal SSD

RS-stocknr.:: 683-222
Fabrikantnummer:: TS256GMTS570T-VS1
Fabrikant:: Transcend

Subtotaal (1 eenheid)*

€ 361,28

(excl. BTW)

€ 437,15

(incl. BTW)

GRATIS bezorging voor bestellingen van meer dan € 90,00

Op voorraad

Plus verzending 1 stuk(s) vanaf 14 september 2026

Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.

Aantal stuks	Per stuk
1 +	€ 361,28

*prijsindicatie

RS-stocknr.:: 683-222
Fabrikantnummer:: TS256GMTS570T-VS1
Fabrikant:: Transcend

Specificaties

Datasheets

Wetgeving en compliance

Productomschrijving

Zoek vergelijkbare producten door een of meer kenmerken te selecteren.

Alles selecteren	Attribuut	Waarde
	Merk	Transcend
	Product Type	SSD
	Memory Size	256MB
	Sub Type	SSD
	Internal/External	Internal
	Form Factor	M.2
	Industrial Grade	Yes
	NAND Type	3D
	Interface Type	SATA III 6 Gb/S
	Maximum Operating Temperature	75°C
	Minimum Operating Temperature	-20°C
	Width	22mm
	Length	42mm
	Standards/Approvals	UKCA
	Height	3.85mm

	Alles selecteren
	Merk Transcend
	Product Type SSD
	Memory Size 256MB
	Sub Type SSD
	Internal/External Internal
	Form Factor M.2
	Industrial Grade Yes
	NAND Type 3D
	Interface Type SATA III 6 Gb/S
	Maximum Operating Temperature 75°C
	Minimum Operating Temperature -20°C
	Width 22mm
	Length 42mm
	Standards/Approvals UKCA
	Height 3.85mm

Datasheet - TS256GMTS570T-VS1

Land van herkomst:: TW

Transcend SSD, 256MB Memory size, M.2 Form Factor - TS256GMTS570T-VS1

This SSD is a Compact internal storage device designed for integration into industrial hardware where dependable solid-state memory is required. It connects via an M.2 Interface using the SATA III 6Gb/s protocol and is intended for applications that operate across a wide temperature range in demanding settings.

Features and Benefits:

• 3D NAND improves data density and endurance for prolonged use
• 256MB cache accelerates read/write responsiveness under load
• Industrial-grade design supports harsh operating environments
• Maximum operating temperature 75°C enables high-heat deployment
• Minimum operating temperature -20°C permits cold-start operation

Applications

• Suitable for embedded controllers in automation systems
• Ideal for data logging in electrical test equipment
• Used with industrial PCs in manufacturing line control
• Can be used for firmware storage in mechanical monitoring units

What physical form factor is required for installation?

It is compatible with M.2 sockets sized for 2242 modules and mounts directly onto the host board.

Which approval marking indicates regional conformity?

It carries the UKCA marking for conformity with applicable UK requirements.

How slim is the drive for space-constrained designs?

The device is a low-profile module with a height of 3.85mm suited to tight internal envelopes.

What Interface speed should I expect during integration?

Integration uses the SATA III Interface at up to 6Gb/s signalling for full protocol throughput.