TE Connectivity Heat Shrink Boot 222K1 Black, Semi-Rigid Polyolefin, 36 mm
- RS-stocknr.:
- 718-2994
- Fabrikantnummer:
- 222K152-3-0
- Fabrikant:
- TE Connectivity
Subtotaal (1 eenheid)*
€ 30,36
(excl. BTW)
€ 36,74
(incl. BTW)
GRATIS bezorging voor bestellingen van meer dan € 75,00
Op voorraad
- Plus verzending 30 stuk(s) vanaf 16 februari 2026
- Plus verzending 47 stuk(s) vanaf 08 juni 2026
Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.
Aantal stuks | Per stuk |
|---|---|
| 1 + | € 30,36 |
*prijsindicatie
- RS-stocknr.:
- 718-2994
- Fabrikantnummer:
- 222K152-3-0
- Fabrikant:
- TE Connectivity
Specificaties
Datasheets
Wetgeving en compliance
Productomschrijving
Zoek vergelijkbare producten door een of meer kenmerken te selecteren.
Alles selecteren | Attribuut | Waarde |
|---|---|---|
| Merk | TE Connectivity | |
| Sub Type | Heat Shrink Boot | |
| Product Type | Heat Shrink Boot | |
| Material | Semi-Rigid Polyolefin | |
| Number of Breakouts | 1 | |
| Colour | Black | |
| Minimum Operating Temperature | -30°C | |
| Maximum Operating Temperature | 105°C | |
| Minimum Inside Diameter | 36mm | |
| Maximum Shrunk Diameter | 22.4mm | |
| Minimum Shrunk Diameter | 8.4mm | |
| Maximum Inside Diameter | 36mm | |
| Standards/Approvals | No | |
| Series | 222K1 | |
| Adhesive Backing | No | |
| Alles selecteren | ||
|---|---|---|
Merk TE Connectivity | ||
Sub Type Heat Shrink Boot | ||
Product Type Heat Shrink Boot | ||
Material Semi-Rigid Polyolefin | ||
Number of Breakouts 1 | ||
Colour Black | ||
Minimum Operating Temperature -30°C | ||
Maximum Operating Temperature 105°C | ||
Minimum Inside Diameter 36mm | ||
Maximum Shrunk Diameter 22.4mm | ||
Minimum Shrunk Diameter 8.4mm | ||
Maximum Inside Diameter 36mm | ||
Standards/Approvals No | ||
Series 222K1 | ||
Adhesive Backing No | ||
General Purpose (Lipped) - 202K1 and 222K1 Series
Moulded parts that provide durable strain relief, protection and an environmental seal when used with an adhesive. Available in straight and right angled types, these chemical and abrasion resistant heat shrink boots are made from a tough modified elastomer, and meet the Def Stan 59-97 Issue 3 Type DE requirements. Other features include recommended shrink temperature 175°C, self-extinguishing to RK6713 and an electric strength of 12MV/m (min.) Meets specification VG95343 parts 6, 7, 8, 9. These boots can be used with spin coupling backshells, but may also be used wherever a connector offers a suitable rear mounting.