HARTING Heavy Duty Power Connector Insert, 10A, Han A Series Female, 4 Contacts
- RS-stocknr.:
- 181-0498
- Artikelnummer Distrelec:
- 143-42-481
- Fabrikantnummer:
- 09200042711
- Fabrikant:
- HARTING
Bulkkorting beschikbaar
Bekijk bulkkortingSubtotaal (1 eenheid)*
€ 16,87
(excl. BTW)
€ 20,41
(incl. BTW)
GRATIS bezorging voor bestellingen van meer dan € 90,00
Op voorraad
- 711 stuk(s) klaar voor verzending
- 787 stuk(s) klaar voor verzending vanaf een andere locatie
- Plus verzending 300 stuk(s) vanaf 17 augustus 2026
Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.
Aantal stuks | Per stuk |
|---|---|
| 1 - 9 | € 16,87 |
| 10 - 24 | € 16,20 |
| 25 - 49 | € 15,50 |
| 50 + | € 14,84 |
*prijsindicatie
- RS-stocknr.:
- 181-0498
- Artikelnummer Distrelec:
- 143-42-481
- Fabrikantnummer:
- 09200042711
- Fabrikant:
- HARTING
Specificaties
Datasheets
Wetgeving en compliance
Productomschrijving
Zoek vergelijkbare producten door een of meer kenmerken te selecteren.
Alles selecteren | Attribuut | Waarde |
|---|---|---|
| Merk | HARTING | |
| Current Rating | 10A | |
| Product Type | Heavy Duty Power Connector Insert | |
| Series | Han A | |
| Sub Type | Connector Insert | |
| Connector Gender | Female | |
| For Use With | Heavy Duty Power Connector | |
| Pole Format | 4+E | |
| Number of Rows | 2 | |
| Voltage | 230, 400V | |
| Mount Type | Panel | |
| IP Rating | IP44 | |
| Manufacturer Size Code | 3A | |
| Standards/Approvals | No | |
| Number of Contacts | 4 | |
| Minimum Wire Size mm² | 1.5mm² | |
| Contact Material | Copper Alloy | |
| Maximum Wire Size mm² | 0.75mm² | |
| Contact Plating | Silver | |
| Orientation | Straight | |
| Alles selecteren | ||
|---|---|---|
Merk HARTING | ||
Current Rating 10A | ||
Product Type Heavy Duty Power Connector Insert | ||
Series Han A | ||
Sub Type Connector Insert | ||
Connector Gender Female | ||
For Use With Heavy Duty Power Connector | ||
Pole Format 4+E | ||
Number of Rows 2 | ||
Voltage 230, 400V | ||
Mount Type Panel | ||
IP Rating IP44 | ||
Manufacturer Size Code 3A | ||
Standards/Approvals No | ||
Number of Contacts 4 | ||
Minimum Wire Size mm² 1.5mm² | ||
Contact Material Copper Alloy | ||
Maximum Wire Size mm² 0.75mm² | ||
Contact Plating Silver | ||
Orientation Straight | ||
- Land van herkomst:
- RO
Harting HanA Series Heavy Duty Power Connector Insert, 10A Current Rating, 400V Voltage - 09200042711
This heavy-duty power connector insert is a panel-mounted, female electrical insert designed for industrial power connections. It provides a straight-orientation, four-pole Plus earth contact arrangement for use in demanding automation, electronics and mechanical environments, with screw termination suited to standard heavy-duty housings.
Features & Benefits
• Rated for 10 A current to support moderate power circuits
• 400V conductor-to-conductor rating for three-phase applications
• Silver-plated copper-alloy contacts to improve conductivity
• Conductor range 0.75–1.5 mm² for common cable sizes
• IP44 protection level to resist splash and solid ingress
• Tightening torque values specified for secure terminations
• 400V conductor-to-conductor rating for three-phase applications
• Silver-plated copper-alloy contacts to improve conductivity
• Conductor range 0.75–1.5 mm² for common cable sizes
• IP44 protection level to resist splash and solid ingress
• Tightening torque values specified for secure terminations
**Applications**
• Suitable for panel-mounted machinery power feeds in factories
• Ideal for control-cabinet distribution of small motors
• Used with heavy-duty housings in test and measurement rigs
• Can be used for temporary power set-ups on site equipment
• Ideal for control-cabinet distribution of small motors
• Used with heavy-duty housings in test and measurement rigs
• Can be used for temporary power set-ups on site equipment
What termination method is required for installation?
Screw termination is used
contact screws accept recommended drivers slotted 0.4x2.5, slotted 0.6x3.5 or PH1 for correct engagement.
How does the insert handle temperature extremes?
It is rated to operate between −40 °C and +125 °C to cope with harsh environmental ranges.
What mechanical endurance can be expected from mating cycles?
The insert endures at least 500 mating cycles, suitable for periodic disconnections.
Are there particular tightening torques for protective earth and contacts?
Contact screws should be tightened to 0.25 N·m (M3) and the PE screw to 0.8 N·m (M3.5) for correct clamping.
Note
Two 16P + E inserts may be accommodated within a ’Size’ 32A housing (typical stock no 363-7964)
Approvals
UL, CSA, SEV
Warning
These connectors should not be mated or unmated under electrical load. Connectors of the same or different types arranged in a line should be polarised to prevent the possibility of wrong connection.
Standards
EN 60664-1
IEC 61984
IEC 61984
Gerelateerde Links
- HARTING Heavy Duty Power Connector Insert & Modules HAN Modular Series, 36 Contacts
- HARTING Heavy Duty Power Connector Insert Han D Series Male, 8 Contacts
- HARTING Heavy Duty Power Connector Insert HAN DD Series Male, 42 Contacts
- HARTING Heavy Duty Power Connector Insert Han D Series Female, 64 Contacts
- HARTING Heavy Duty Power Connector Insert HAN DD Series Female, 24 Contacts
- HARTING Heavy Duty Power Connector Insert HAN DD Series Female, 42 Contacts
- HARTING Heavy Duty Power Connector Insert Han D Series Female, 8 Contacts
- HARTING Heavy Duty Power Connector Insert Han ES Series Female, 6 Contacts