Starrett HSS 102mm Hole Saw Bi-Metal, 38mm Cut Depth

  • RS-stocknr. 615-191
  • Fabrikantnummer FCH0400
  • Fabrikant Starrett
Datasheets
Wetgeving en compliance
N.v.t.
Land van herkomst: GB
Productomschrijving

Starrett HSS 'Fast Cut' Bi-metal Hole Saws

Hardened cutting edge (6tpi alternate set) welded to a tough alloy steel body
Bonded construction reduces possibility of shattering
For use with cast iron, tool and stainless, steel, brass, bronze, aluminium, plastics and wood to a depth of 32mm
6.5mm arbor required for hole saw diameters 14 to 30mm and 9.5mm arbor for 32 to 152mm hole saw diameters
Arbors, pilot drills and an ejector spring to aid core removal are also available; see Arbors & Accessories range

Specificaties
Kenmerk Waarde
Diameter 102mm
Material HSS
Cut Depth 38mm
Type Hole Saw
Bimetal Yes
4 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
74 op voorraad - levertijd is 2 werkdag(en) (UK-voorraad)
Prijs Each
23,50
(excl. BTW)
28,44
(incl. BTW)
Aantal stuks
Per stuk
1 +
€ 23,50
Related Products
• Hardened cutting edge (6tpi alternate set) welded ...
Description:
• Hardened cutting edge (6tpi alternate set) welded to a tough alloy steel body• Bonded construction reduces possibility of shattering• For use with ferrous and non ferrous metals, plastics and wood to a depth of 32 mm• 14 to 30 ...
Bi-metal holesaws for use with battery operated power ...
Description:
Bi-metal holesaws for use with battery operated power tools with 1/4in. Hex drive. The constant pitch teeth means that these holesaws provide an exceptionally smooth cut. Ideal for cutting stainless steel, tool and mild steel sheeting plus plaster board, wood ...
Hardened cutting edge (6tpi alternate set) welded to ...
Description:
Hardened cutting edge (6tpi alternate set) welded to a tough alloy steel bodyBonded construction reduces possibility of shatteringFor use with cast iron, tool and stainless, steel, brass, bronze, aluminium, plastics and wood to a depth of 32mm6.5mm arbor required for ...
Carbide Tipped HolesawsFor use with fibreglass, galvanised iron, ...
Description:
Carbide Tipped HolesawsFor use with fibreglass, galvanised iron, 'Formica' laminates etc.Compatible with standard arbors and accessories6.5mm Arbour for 25-38mm hole saws, 9.5mm arbour for 40-51mm hole saws.