Alpha Wire Ecogen Ecowire Series White 0.33 mm² Hook Up Wire, 22 AWG, 7, 30 m, Modified Polyphenylene Ether, 6713 WH005
- RS-stocknr.:
- 687-7468
- Artikelnummer Distrelec:
- 300-59-340
- Fabrikantnummer:
- 6713 WH005
- Fabrikant:
- Alpha Wire
Subtotaal (1 rol van 30 meter)*
€ 30,28
(excl. BTW)
€ 36,64
(incl. BTW)
Informatie over voorraden is momenteel niet toegankelijk - Controleer het later nog eens opnieuw
Rol(len) | Per rol | Per meter* |
|---|---|---|
| 1 + | € 30,28 | € 1,009 |
*prijsindicatie
- RS-stocknr.:
- 687-7468
- Artikelnummer Distrelec:
- 300-59-340
- Fabrikantnummer:
- 6713 WH005
- Fabrikant:
- Alpha Wire
Specificaties
Datasheets
Wetgeving en compliance
Productomschrijving
Zoek vergelijkbare producten door een of meer kenmerken te selecteren.
Alles selecteren | Attribuut | Waarde |
|---|---|---|
| Merk | Alpha Wire | |
| Cross Sectional Area | 0.33mm² | |
| Product Type | Hook Up Wire | |
| Jacket Colour | White | |
| American Wire Gauge | 22AWG | |
| Core Strands | 7 | |
| Cable Length | 30m | |
| Outside Diameter | 1.24mm | |
| Voltage | 600V | |
| Maximum Operating Temperature | 105°C | |
| Conductor Material | Tinned Copper | |
| Sub Type | EcoWire | |
| Standards/Approvals | CE, CSA, UL | |
| Minimum Operating Temperature | -40°C | |
| Cable Type | Hookup | |
| Jacket Material | Modified Polyphenylene Ether | |
| Fire Behaviour | Flame Retardant | |
| Series | Ecogen Ecowire | |
| Alles selecteren | ||
|---|---|---|
Merk Alpha Wire | ||
Cross Sectional Area 0.33mm² | ||
Product Type Hook Up Wire | ||
Jacket Colour White | ||
American Wire Gauge 22AWG | ||
Core Strands 7 | ||
Cable Length 30m | ||
Outside Diameter 1.24mm | ||
Voltage 600V | ||
Maximum Operating Temperature 105°C | ||
Conductor Material Tinned Copper | ||
Sub Type EcoWire | ||
Standards/Approvals CE, CSA, UL | ||
Minimum Operating Temperature -40°C | ||
Cable Type Hookup | ||
Jacket Material Modified Polyphenylene Ether | ||
Fire Behaviour Flame Retardant | ||
Series Ecogen Ecowire | ||
- Land van herkomst:
- MX
Belden Ecogen Ecowire Series Hook Up Wire, 0.33mm² Cross Sectional Area, White Jacket - 6713 WH001
This hook‑up wire is a multi‑strand copper conductor intended for internal wiring and signal connections in industrial and medical environments. It combines a halogen‑free thermoplastic insulation with a polyurethane jacket to deliver a balance of thermal endurance and reduced toxic emissions during fire scenarios. The product is rated for continuous use in systems requiring up to 600V and is specified for environments where low outgassing and flame performance are required.
Features & Benefits
• 0.33mm² 7‑strand copper offers flexibility for tight routing
• Rated to 105°C for high temperature installations
• Zero‑halogen construction reduces corrosive gases in fires
• IEC 60332‑2 and UL VW‑1 demonstrate flame resistance
• 87% lower outgassing minimises contaminant release
• Meets ISO 10993‑5 for biocompatibility considerations
• Rated to 105°C for high temperature installations
• Zero‑halogen construction reduces corrosive gases in fires
• IEC 60332‑2 and UL VW‑1 demonstrate flame resistance
• 87% lower outgassing minimises contaminant release
• Meets ISO 10993‑5 for biocompatibility considerations
**Applications**
• Suitable for wiring in automation cabinets and control panels
• Ideal for harnesses in electronics manufacturing and assemblies
• Used with equipment requiring RoHS and REACH conformity
• Can be used for medical device internal connections under ISO testing
• Suitable for electrical installations needing UL and CSA wire types
• Ideal for harnesses in electronics manufacturing and assemblies
• Used with equipment requiring RoHS and REACH conformity
• Can be used for medical device internal connections under ISO testing
• Suitable for electrical installations needing UL and CSA wire types
What conductor construction provides flexibility for routing?
The conductor comprises seven copper strands sized to a 0.33mm² cross‑section, which reduces stiffness and aids installation in confined channels.
How is the outer material composition arranged?
Insulation is based on modified polyphenylene ether while the outer jacket incorporates polyurethane to balance mechanical abrasion resistance with low‑emission performance.
Which standards confirm its electrical and safety characteristics?
It holds recognitions covering UL AWM, CSA AWM FT1/FT2, IEC 60332‑2 flame behaviour and UL VW‑1 for vertical flame testing.
What packaging options are available for production needs?
Supply choices include continuous lengths on reels from 100 ft up to 25,000 ft to suit prototyping through high‑volume production.
How does the wire support environmental regulatory requirements?
Materials comply with RoHS and REACH declarations and meet China RoHS marking expectations for restricted substances.
Standards
UL AWM 11028 VW-1, CSA AWM I A/B FT1, RoHS/RoHS2 Compliant, IEC 60332-2 Flame Behavior, REACH Compliant, CE Compliant
Gerelateerde Links
- Alpha Wire Ecogen Ecowire Series Orange 0.33 mm² Hook Up Wire 7 Modified Polyphenylene Ether, 6713
- Alpha Wire Ecogen Ecowire Series Purple 0.33 mm² Hook Up Wire 7 Modified Polyphenylene Ether, 6713
- Alpha Wire Ecogen Ecowire Series Yellow 0.33 mm² Hook Up Wire 7 Modified Polyphenylene Ether, 6713
- Alpha Wire Ecogen Ecowire Series Dark Blue Hook Up Wire 7 Modified Polyphenylene Ether, 6713 DB005
- Alpha Wire Ecogen Ecowire Series Dark Blue Hook Up Wire 7 Modified Polyphenylene Ether, 6713 DB001
- Alpha Wire Ecogen Ecowire Series Slate 0.33 mm² Hook Up Wire 7 Modified Polyphenylene Ether, 6713 RD001
- Alpha Wire Ecogen Ecowire Series Grey 0.33 mm² Hook Up Wire 7 Modified Polyphenylene Ether, 6713 SL001
- Alpha Wire Ecogen Ecowire Series Green 0.33 mm² Hook Up Wire 7 Modified Polyphenylene Ether, 6713 GR001