Jubilee Mild Steel Slotted Hex Quick Release Strap, 11mm Band Width, 50mm - 300mm Inside Diameter

  • RS-stocknr. 144-0740
  • Fabrikantnummer CAS300MS
  • Fabrikant Jubilee
Datasheets
Wetgeving en compliance
Conform
Land van herkomst: GB
Productomschrijving

Jubilee Captive Straps are used in a wide range of applications where a closed installation requires the clamp to be opened fully for positioning of the clamp. Examples include sign fixing, cable retention, repairs and heating, ventilation and air conditioning. Jubilee Captive Straps are available in mild and stainless steel.

7mm hex head or slotted design
Zinc protected mild steel or all 304 stainless steel
11mm or 7mm band width
Made in UK

Jubilee Quick Release Straps are used in a wide range of applications where a closed installation requires the clamp to be opened fully for positioning. Examples include sign fixing, cable retention, repairs and heating, ventilation and air conditioning. Jubilee Quick Release Straps are available in mild and stainless steel. Jubilee Quick Release Straps are manufactured with a quick release swivel housing design which locks into position once the clip is fastened. The strong housing design ensures a higher maximum tightening torque than other quick release designs and the screw fitting requires no specialist tools to install, making installation quicker and more cost effective than some more complex solutions. The design also benefits from being reusable. Jubilee Quick Release Straps may also be used in cable retaining applications where nylon cable ties are not suitable due to fire regulations. Jubilee Quick Release Straps have a very wide clamping range and excess band material can be removed at the point of installation. These clamps are flexible enough to conform to unusually shaped fittings and they are also suitable for very large diameter applications.

Specificaties
Kenmerk Waarde
Inside Diameter 50 → 300mm
Clip Type Quick Release Strap
Material Mild Steel
Inside Diameter Minimum 50
Inside Diameter Maximum 300mm
Band Width 11mm
Screw/Bolt Head Slotted Hex
tijdelijk niet op voorraad – nieuwe voorraad verwacht op 29-01-2020, met een levertijd van 2 à 3 werkdagen.
Prijs 1 Bag of 2
8,24
(excl. BTW)
9,97
(incl. BTW)
Bag(s)
Per zak
Per stuk*
1 - 4
€ 8,24
€ 4,12
5 - 9
€ 7,83
€ 3,915
10 - 29
€ 7,42
€ 3,71
30 +
€ 6,92
€ 3,46
*prijsindicatie
Related Products
Standard worm-drive hose clips to BS5315 available in ...
Description:
Standard worm-drive hose clips to BS5315 available in either BZP steel or A2 grade 18//8 stainless steelClips are marked with BS kitemark and appropriate BS size numberClips are 13mm wide, except for 12-20mm sizes which are 10mm wide7mm slotted hexagonal ...
The RS Pro hose clips are manufactured in ...
Description:
The RS Pro hose clips are manufactured in 316 grade stainless steel. The hose clips are tested and BSI Kitemarked certified to British Standard 5135:1991. W5 hose clips are entirely manufactured from AISI-316 stainless steel, comparable to W5 DIN3017 (German ...
Unex™ Hose Clips products manufactured by Uniclip Ltd ...
Description:
Unex™ Hose Clips products manufactured by Uniclip Ltd Hose Clips employ a double stainless steel band design which totally encircles the clamped tubing, providing evenly distributed clamping pressures able to seal up to 136 bar. 11mm wide A2 grade stainless ...
Heavy-duty Hi-torque™ hose clipsMade from A2 Stainless steelSuitable ...
Description:
Heavy-duty Hi-torque™ hose clipsMade from A2 Stainless steelSuitable for tough and wire-reinforced hosesHigher sealing pressures due to the ability of being tightened to more than twice the torque of ordinary clips8mm slotted hex securing screwRecommended torque=15Nm.