Hi-Force Hydraulic Hand-Operated Jack 10t Capacity, 75mm Lift Height
- RS-stocknr.:
- 120-946
- Fabrikantnummer:
- JAS103
- Fabrikant:
- Hi-Force
Afbeelding representeert productcategorie
Subtotaal (1 eenheid)*
€ 1.128,59
(excl. BTW)
€ 1.365,59
(incl. BTW)
GRATIS bezorging voor bestellingen van meer dan € 75,00
Tijdelijk niet op voorraad
- Verzending vanaf 09 januari 2026
Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.
Aantal stuks | Per stuk |
|---|---|
| 1 + | € 1.128,59 |
*prijsindicatie
- RS-stocknr.:
- 120-946
- Fabrikantnummer:
- JAS103
- Fabrikant:
- Hi-Force
Specificaties
Datasheets
Wetgeving en compliance
Productomschrijving
Zoek vergelijkbare producten door een of meer kenmerken te selecteren.
Alles selecteren | Attribuut | Waarde |
|---|---|---|
| Merk | Hi-Force | |
| Capacity | 10t | |
| Lift Height | 75mm | |
| Alles selecteren | ||
|---|---|---|
Merk Hi-Force | ||
Capacity 10t | ||
Lift Height 75mm | ||
Vrijgesteld
- Land van herkomst:
- GB
Lightweight Jacks
Lightweight high strength aluminium construction, with two models offering a choice of stroke options
Rams are spring assisted return, with an integral stop ring to prevent over extension
The sealed hydraulic system design avoids the need for breather valves thus enabling operation in any position without risk of internal or external contamination
To prevent overload, a safety overload protection valve is fitted
Removable operation lever supplied
The positive action load release valve prevents accidental lowering of the ram whilst operating the pumping mechanism
All jacks are individually tested and are issued with a manufacturers test certificate
Rams are spring assisted return, with an integral stop ring to prevent over extension
The sealed hydraulic system design avoids the need for breather valves thus enabling operation in any position without risk of internal or external contamination
To prevent overload, a safety overload protection valve is fitted
Removable operation lever supplied
The positive action load release valve prevents accidental lowering of the ram whilst operating the pumping mechanism
All jacks are individually tested and are issued with a manufacturers test certificate
Warning
Mechanical supports should be used to support loads, do not rely on the jack hydraulic pressure alone.
Gerelateerde Links
- Hi-Force Hydraulic Hand-Operated Jack 10t Capacity, 125mm Lift Height
- Hi-Force Hydraulic Hand-Operated Jack 10t Capacity, 35mm Lift Height
- Facom Hydraulic Hand-Operated Jack 1t Capacity, 2500mm Lift Height
- SAM Hydraulic Hand-Operated Jack 1t Capacity, 620mm Lift Height
- Hi-Force Single HPS100 10mm stroke
- Hi-Force Single HLS101 40mm stroke
- Hi-Force Single HVL10 6mm stroke
- Facom Hydraulic Bearing Puller, 10t Force
