Schurter C14 Right Angle Panel Mount IEC Connector Male, 10A, 250 V
- RS-stocknr.:
- 218-8994
- Fabrikantnummer:
- GSP2.9213.13
- Fabrikant:
- Schurter
Niet meer leverbaar – bekijk hieronder eventuele alternatieven of neem contact op met onze Customer Service
- RS-stocknr.:
- 218-8994
- Fabrikantnummer:
- GSP2.9213.13
- Fabrikant:
- Schurter
Datasheets
Wetgeving en compliance
- Land van herkomst:
- CZ
Productomschrijving
Harpoon sockets for printed circuits
These sockets are for soldering on a printed circuit and are secured using two plastic harpoons (snap-fit assembly).
The thickness of the printed circuit must not exceed 1.6 mm; these sockets are available for panels 1.5 mm (stock no. 218-8994) or 2 mm (stock no. 218-9004) thick.
A protective cover is supplied with each connector.
The thickness of the printed circuit must not exceed 1.6 mm; these sockets are available for panels 1.5 mm (stock no. 218-8994) or 2 mm (stock no. 218-9004) thick.
A protective cover is supplied with each connector.
Standards
IEC 320/C14 and EN 60320
Specificaties
Kenmerk | Waarde |
|---|---|
| IEC Connector Type | C14 |
| Mounting Type | Panel Mount |
| Gender | Male |
| Current Rating | 10A |
| Body Orientation | Right Angle |
| Termination Method | Snap-In |
| Switch Type | None |
| Voltage Rating | 250 V |