Schaffner, 250V ac 2A Panel Mount IEC Filter Male 2 Fuse, Faston
- RS-stocknr.:
- 188-9618
- Artikelnummer Distrelec:
- 169-66-672
- Fabrikantnummer:
- FN9260-2-06
- Fabrikant:
- Schaffner
Bulkkorting beschikbaar
Subtotaal (1 eenheid)*
€ 16,58
(excl. BTW)
€ 20,06
(incl. BTW)
GRATIS bezorging voor bestellingen van meer dan € 90,00
Op voorraad
- 185 stuk(s) klaar voor verzending
- 776 stuk(s) klaar voor verzending vanaf een andere locatie
Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.
Aantal stuks | Per stuk |
|---|---|
| 1 - 9 | € 16,58 |
| 10 - 24 | € 14,92 |
| 25 + | € 14,09 |
*prijsindicatie
- RS-stocknr.:
- 188-9618
- Artikelnummer Distrelec:
- 169-66-672
- Fabrikantnummer:
- FN9260-2-06
- Fabrikant:
- Schaffner
Specificaties
Datasheets
Wetgeving en compliance
Productomschrijving
Zoek vergelijkbare producten door een of meer kenmerken te selecteren.
Alles selecteren | Attribuut | Waarde |
|---|---|---|
| Merk | Schaffner | |
| Product Type | IEC Filter | |
| Number of Fuses | 2 | |
| Fuse Size | 5 x 20 mm | |
| Current | 2A | |
| Connector Gender | Male | |
| Voltage | 250V ac | |
| Mount Type | Panel Mount | |
| Operating Frequency | 0, 400Hz | |
| IEC Connector Type | IEC/EN 60939 | |
| Minimum Operating Temperature | -25°C | |
| Maximum Operating Temperature | 85°C | |
| Termination Type | Faston | |
| Contact Gender | Male | |
| Height | 46mm | |
| Depth | 60.3mm | |
| Standards/Approvals | No | |
| Width | 35mm | |
| Alles selecteren | ||
|---|---|---|
Merk Schaffner | ||
Product Type IEC Filter | ||
Number of Fuses 2 | ||
Fuse Size 5 x 20 mm | ||
Current 2A | ||
Connector Gender Male | ||
Voltage 250V ac | ||
Mount Type Panel Mount | ||
Operating Frequency 0, 400Hz | ||
IEC Connector Type IEC/EN 60939 | ||
Minimum Operating Temperature -25°C | ||
Maximum Operating Temperature 85°C | ||
Termination Type Faston | ||
Contact Gender Male | ||
Height 46mm | ||
Depth 60.3mm | ||
Standards/Approvals No | ||
Width 35mm | ||
Double Fused FN9260
The FN9260 power entry module combines an IEC inlet, mains filter with excellent filter attenuation and fuses in a small form factor. A wide selection on amperage ratings, output connections, mounting possibilities and filters for medical applications are designed to offer you the desired solution.
Can be used in a wide range of applications such as portable electrical & electronic equipment, medical equipment, household equipment, single-phase power supplies, switch-mode power supplies and test & measurement equipment.
Versions up to 10 A are available with fuse holder for one or two fuses
Optional safety version (A type)
Complies with IEC/EN 60601-1
Snap-in versions (S type)
Schaffner Type FN Fused/Fused and Switched
IEC Inlet plugs with integral mains filter. Designed to filter mains borne interference where capacitors alone may prove inadequate. Connection by 250 ( 1/4 in) receptacles. (For insulating boots see typically RS stock no. 526-0724). Accept 20 x 5mm dia. fuses. Fuses not included.
Approvals
UL recognised component, CSA certified, VDE
Warning
Neutral line must not be fused where it is referenced to earth.