Megger MIT485 Insulation Tester, 50V Min, 500V Max, 200GΩ Max, CAT IV - UKAS Calibration

RS-stocknr.:: 122-6810
Fabrikantnummer:: 1004-742
Fabrikant:: Megger

Megger MIT485 Insulation Tester, 50V Min, 500V Max, 200GΩ Max, CAT IV - UKAS Calibration

Subtotaal (1 eenheid)*

€ 1.368,00

(excl. BTW)

€ 1.655,28

(incl. BTW)

GRATIS bezorging voor bestellingen van meer dan € 75,00

Informatie over voorraden is momenteel niet toegankelijk

Aantal stuks	Per stuk
1 +	€ 1.368,00

*prijsindicatie

RS-stocknr.:: 122-6810
Fabrikantnummer:: 1004-742
Fabrikant:: Megger

Specificaties

Datasheets

Wetgeving en compliance

Productomschrijving

Zoek vergelijkbare producten door een of meer kenmerken te selecteren.

Alles selecteren	Attribuut	Waarde
	Merk	Megger
	Model Number p	MIT485
	Tester Type	Insulation Tester
	Minimum Test Voltage	50V
	Maximum Test Voltage	500V
	Maximum Insulation Resistance Measurement	200GΩ
	Display Type	Digital
	Calibrated	UKAS
	Test Current	20 mA @ 10.0 Ω → 99.9 Ω, 205 mA @ 0.01 Ω → 9.99 Ω
	Power Source	Battery
	Battery Type	Alkaline, NiMH
	Battery Life	2200 5-Second Tests
	Minimum Operating Temperature	-20°C
	Maximum Operating Temperature	+55°C
	Safety Category Voltage	600V
	Safety Category Level	CAT IV
	Safety Category	CAT IV 600V
	Weight	590 g, 775 (With Boot) g
	Length	92mm
	Width	50mm
	Height	220mm
	Dimensions	92 x 50 x 220mm

	Alles selecteren
	Merk Megger
	Model Number p MIT485
	Tester Type Insulation Tester
	Minimum Test Voltage 50V
	Maximum Test Voltage 500V
	Maximum Insulation Resistance Measurement 200GΩ
	Display Type Digital
	Calibrated UKAS
	Test Current 20 mA @ 10.0 Ω → 99.9 Ω, 205 mA @ 0.01 Ω → 9.99 Ω
	Power Source Battery
	Battery Type Alkaline, NiMH
	Battery Life 2200 5-Second Tests
	Minimum Operating Temperature -20°C
	Maximum Operating Temperature +55°C
	Safety Category Voltage 600V
	Safety Category Level CAT IV
	Safety Category CAT IV 600V
	Weight 590 g, 775 (With Boot) g
	Length 92mm
	Width 50mm
	Height 220mm
	Dimensions 92 x 50 x 220mm

Datasheet

Land van herkomst:: GB

Megger Insulation Tester, 0.1kΩ Resolution, 800g Weight - MIT480/2 Series - 1004-742

Keep tabs on the electrical resistance of your communication equipment and cables with this insulation tester from Megger. It assesses how much your appliances oppose the current flow, ensuring they're safe to use in volatile settings. The unit features an innovative three-terminal measurement feature that lets you plug in your tip, ring and ground test leads simultaneously, saving time and hassle. With a testing capacity between 10 and 100GΩ, this multitasker is handy for domestic, commercial and industrial use.

Features & Benefits

• Dual digital display shows you the main results and supplementary data (such as frequency) simultaneously

• Powered by six AA batteries that provide energy for up to 3000 measurements at 500V, assuring you of long-term performance

• Rubber over-moulding and ABS housing to withstand rough handling

• IP54 rating indicates that it's protected against limited amounts of dust and light water sprays

Applications

• Power generation plants

• Charge amplifiers

• Transformers and switchgear

Does this tester have an audible indicator?

Yes, its built-in buzzer goes off when the insulation limit goes above a preset threshold. You can turn the alarm off or on using a simple push button.