Gossen Metrawatt METRISO 5024 Insulation Tester, 100 V Min, 500 V Max, 400 MΩ CAT II
- RS-stocknr.:
- 606-3625
- Fabrikantnummer:
- M540E
- Fabrikant:
- Gossen Metrawatt
Subtotaal (1 eenheid)*
€ 839,31
(excl. BTW)
€ 1.015,57
(incl. BTW)
GRATIS bezorging voor bestellingen van meer dan € 90,00
Op voorraad
- 1 stuk(s) klaar voor verzending
Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.
Aantal stuks | Per stuk |
|---|---|
| 1 + | € 839,31 |
*prijsindicatie
- RS-stocknr.:
- 606-3625
- Fabrikantnummer:
- M540E
- Fabrikant:
- Gossen Metrawatt
Specificaties
Datasheets
Wetgeving en compliance
Productomschrijving
Zoek vergelijkbare producten door een of meer kenmerken te selecteren.
Alles selecteren | Attribuut | Waarde |
|---|---|---|
| Merk | Gossen Metrawatt | |
| Product Type | Insulation Tester | |
| Model Number | METRISO 5024 | |
| Tester Type | Insulation Tester | |
| Maximum Test Voltage | 500V | |
| Minimum Test Voltage | 100V | |
| Display Type | Analogue | |
| Test Current | 200mA | |
| Power Source | Battery | |
| Battery Type | AA | |
| Minimum Operating Temperature | 0°C | |
| Insulation Testing Resistance | 400MΩ | |
| Maximum Operating Temperature | 40°C | |
| Safety Category Level | CAT II | |
| Safety Category Voltage | 600V | |
| Standards/Approvals | IEC 61557, EN 61557, VDE 0413 | |
| Width | 98mm | |
| Height | 40mm | |
| Length | 310mm | |
| Weight | 500g | |
| Alles selecteren | ||
|---|---|---|
Merk Gossen Metrawatt | ||
Product Type Insulation Tester | ||
Model Number METRISO 5024 | ||
Tester Type Insulation Tester | ||
Maximum Test Voltage 500V | ||
Minimum Test Voltage 100V | ||
Display Type Analogue | ||
Test Current 200mA | ||
Power Source Battery | ||
Battery Type AA | ||
Minimum Operating Temperature 0°C | ||
Insulation Testing Resistance 400MΩ | ||
Maximum Operating Temperature 40°C | ||
Safety Category Level CAT II | ||
Safety Category Voltage 600V | ||
Standards/Approvals IEC 61557, EN 61557, VDE 0413 | ||
Width 98mm | ||
Height 40mm | ||
Length 310mm | ||
Weight 500g | ||
Vrijgesteld
- Land van herkomst:
- DE
Gossen-Metrawatt Insulation Tester, 500V Maximum Test Voltage, 400 MΩ Insulation Testing Resistance - M540E
This insulation tester is a battery-powered analogue instrument designed to assess insulation resistance in electrical installations up to 500V. It operates within typical ambient conditions and is intended for field measurements where a simple, manual readout and portability are required. The unit conforms to recognised safety and measurement standards for insulation testing and is configured for single-handed field use with AA cell power.
Features and Benefits:
• 200mA test current delivers decisive insulation fault detection
• 400MΩ resistance range enables assessment of high-resistance circuits
• CAT II 600V safety rating protects operators on low-voltage installations
• Analogue display offers immediate, intuitive reading without delay
• Battery powered AA design supports Rapid field battery replacement
• 400MΩ resistance range enables assessment of high-resistance circuits
• CAT II 600V safety rating protects operators on low-voltage installations
• Analogue display offers immediate, intuitive reading without delay
• Battery powered AA design supports Rapid field battery replacement
Applications
• Suitable for installation insulation diagnostics on wiring
• Used for periodic maintenance of low-voltage distribution equipment
• Ideal for site acceptance testing of newly installed cabling
• Can be used for troubleshooting motor winding insulation degradation
• Used with temporary power systems to verify insulation condition
• Used for periodic maintenance of low-voltage distribution equipment
• Ideal for site acceptance testing of newly installed cabling
• Can be used for troubleshooting motor winding insulation degradation
• Used with temporary power systems to verify insulation condition
What temperature range is appropriate for accurate measurements?
It is specified to operate between 0°C and 40°C to maintain intended accuracy and performance.
How large and heavy is the instrument for transport considerations?
The instrument measures 310mm in length, 98mm in width and 40mm in height, weighing 500g for straightforward portability.
Which standards does it meet for electrical measurement conformity?
It is compliant with IEC 61557, EN 61557 and VDE 0413 for insulation testing applications.
What are the selectable test voltage limits available?
The unit provides test voltages ranging from 100V up to a maximum of 500V for adaptable testing profiles.
Supplied with
METRISO 5024, carry case, spare fuse, instruction manual
Gerelateerde Links
- Gossen Metrawatt METRISO TECH Insulation Tester 1 kV Max CAT IV, CAT III
- Gossen Metrawatt METRISO PRIME Insulation Tester 5 kV Max CAT III, CAT II
- Gossen Metrawatt METRISO 1000A Insulation Tester 1 kV Max, 400 MΩ CAT II
- Gossen Metrawatt Z580C Insulation Tester Lead Lead, For Use With METRISO 5000 A
- Gossen Metrawatt Z580D Insulation Tester Cable Lead, For Use With METRISO 5000 A/AK High Voltage Insulation Tester
- Gossen Metrawatt M246C Insulation Tester 1 kV Max CAT II
- Gossen Metrawatt Z580B Insulation Tester Crocodile Clip Crocodile Clip, For Use With METRISO 5000 A
- Gossen Metrawatt M246C Insulation Tester 1 kV Max CAT II, UKAS
