Ixxat D-Sub 9-Pin to D-Sub 9-Pin Interface Converter

Bekijk deze categorie

Subtotaal (1 eenheid)*

€ 332,14

(excl. BTW)

€ 401,89

(incl. BTW)

Add to Basket
selecteer of typ hoeveelheid
Op voorraad
  • Plus verzending 3 stuk(s) vanaf 23 maart 2026
Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.
Aantal stuks
Per stuk
1 +€ 332,14

*prijsindicatie

RS-stocknr.:
226-2732
Fabrikantnummer:
1.01.0067.44010
Fabrikant:
Ixxat
Zoek vergelijkbare producten door een of meer kenmerken te selecteren.
Alles selecteren

Merk

Ixxat

Product Type

Interface Converter

Connector Type A

D-Sub 9-Pin

Transmission Speed

1Mbps

Connector Type B

D-Sub 9-Pin

Nominal Supply Voltage

9/32 V

Mount Type

DIN Rail

Number of Connectors B

2

Minimum Operating Temperature

-20°C

Maximum Operating Temperature

70°C

Standards/Approvals

CE, RoHS, FCC

Weight

300g

Depth

100mm

Width

22.5 mm

Height

115mm

Land van herkomst:
DE

Ixxat CAN-CR200 – Modular CAN repeater with two CAN channels and DIN rail bus, galvanically isolated


The Ixxat CAN-CR200 is a modular CAN repeater with two CAN interfaces and a CAN backbone bus. It is used to improve the CAN bus load capacity, to establish a physical coupling of bus systems or to insert a galvanic isolation. The device creates the necessary flexibility to optimize the structure of CAN networks, as it enables the implementation of tree or star topologies as well as stub lines. With the integrated DIN rail backbone bus, it’s possible to easily line up and connect multiple repeaters, e.g. for creating star topologies. Optimized network structures result in simpler cable wiring and cost savings at installation and maintenance.

The integrated galvanic isolation is provided for both the CAN segments and the supply voltage, and reliably increases the protection of the device against overvoltage and voltage peaks. In case of disturbances in the CAN lines, the repeater automatically disconnects the affected segment and restores it after the fault is resolved, ensuring uninterrupted network operation.

Ixxat CAN repeaters are specially designed for use in an industrial environment, meeting the highest demands in terms of robustness, temperature range and safety.

Features and Benefits


  • Cost savings due to simple wiring

  • Almost no influence on real-time behavior (propagation delay ca. 40 m/200 ns)

  • Greater flexibility in CAN network design

  • Separates a defective segment, allowing the remaining network to continue working

  • Increased system reliability

  • DIN rail backbone bus to line up and connect repeaters easily

    • Technical Data


  • Connectors: 2 x D-Sub 9, 1 x DIN rail backbone bus (TBUS), 1 x screw terminal (Power)

  • CAN interface: CAN high-speed (ISO 11898-2 with CAN choke)

  • CAN bit rates: 10 kBit/s to 1 Mbit/s

  • CAN bus termination resistors: 120 Ohm switchable via DIP switch

  • Galvanic isolation: 1 kV DC for 1 sec, 500 V AC for 1 min. CAN 1, CAN 2 and backbone bus are galvanically isolated against each other.

  • Certification: CE, FCC

    • Gerelateerde Links