FTDI Chip USB Type A to Receptacle x 10, Single Pole Converter Cable

Bekijk deze categorie
Bulkkorting beschikbaar

Subtotaal (1 eenheid)*

€ 39,45

(excl. BTW)

€ 47,73

(incl. BTW)

Add to Basket
selecteer of typ hoeveelheid
Op voorraad
  • 9 stuk(s) klaar voor verzending
  • 1 stuk(s) klaar voor verzending vanaf een andere locatie
Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.
Aantal stuks
Per stuk
1 - 9€ 39,45
10 - 49€ 38,44
50 +€ 37,49

*prijsindicatie

RS-stocknr.:
741-7076
Artikelnummer Distrelec:
304-01-762
Fabrikantnummer:
C232HM-DDHSL-0
Fabrikant:
FTDI Chip
Zoek vergelijkbare producten door een of meer kenmerken te selecteren.
Alles selecteren

Merk

FTDI Chip

Product Type

Converter Cable

Connector Type A

USB Type A

Transmission Speed

30Mbps

Transmission Length

0.5m

Connector Type B

Receptacle x 10, Single Pole

Nominal Supply Voltage

3.3 V

Number of Connectors B

10

Minimum Operating Temperature

-40°C

Maximum Operating Temperature

85°C

Height

16mm

Depth

42.5mm

Standards/Approvals

RoHS, FCC, CE

FTDI Chip USB To MPSSE Cable


The FTDI Chip 500mm USB to MPSSE cable contains a small internal electronic circuit board, utilising the FTDI FT232H. It is encapsulated into the USB connector at the end of the cable to handle all the USB signalling and protocols. The cable provides a fast and simple way to connect devices with 3.3VDC digital interfaces to the USB. The integrated FT232H device incorporates a command processor called the Multi-Protocol Synchronous Serial Engine (MPSSE). The purpose of the MPSSE command processor is to communicate with devices that use synchronous protocols (such as JTAG, SPI, or I2C) efficiently. The cable is terminated by ten individual wires with single pole connectors that can be interfaced to a male header.

Features and Benefits


Connector A is male USB

Connector B is female receptacle

USB 2.0 Hi-speed (480Mbps) and full speed (12Mbps) compatible

Maximum output current rating is 250mA at 3.3VDC on VCC

1kB receive and transmit buffers for high data throughput

Adjustable receive buffer timeout

Entire USB protocol handled on the chip – No USB-specific firmware programming required

Fully assisted hardware or X-ON/ X-OFF software handshaking

Low operating and USB suspend current low USB bandwidth consumption

Support for USB suspend and resume

Synchronous serial (MPSSE) data rates of up to 30Mbps on JTAG, SPI, and I²C

Transmit and receive LED drive signals

UHCI/ OHCI/ EHCI host controller compatible

USB bus powered

USB type A connector for direct connection to a host or hub

Operating temperature ranges between -40 and 85°C

Applications


Automation systems

Electronic devices

Certifications


ANSI/ESD S20.20:2014

BS EN 61340-5-1:2007

FCC certified

CE certified

UL2464 approved

Gerelateerde Links