Broadcom Isolation Amplifier, 8-Pin 5.5V DIP-8
- RS-stocknr.:
- 450-903P
- Fabrikantnummer:
- HCPL-7800A-300E
- Fabrikant:
- Broadcom
Ontvang bulkkorting
Voeg 25 meer toe om € 18,50 te besparen
Bekijk bulkkortingSubtotaal 10 eenheden (geleverd in een buis)*
€ 120,90
(excl. BTW)
€ 146,30
(incl. BTW)
GRATIS bezorging voor bestellingen van meer dan € 90,00
Op voorraad
- 228 stuk(s) klaar voor verzending vanaf een andere locatie
- Plus verzending 450 stuk(s) vanaf 21 december 2026
Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.
Aantal stuks | Per stuk | Bespaar |
|---|---|---|
| 10 - 24 | € 12,09 | - |
| 25 + | € 11,35 | € 18,50 |
*prijsindicatie
- RS-stocknr.:
- 450-903P
- Fabrikantnummer:
- HCPL-7800A-300E
- Fabrikant:
- Broadcom
Specificaties
Datasheets
Wetgeving en compliance
Productomschrijving
Zoek vergelijkbare producten door een of meer kenmerken te selecteren.
Alles selecteren | Attribuut | Waarde |
|---|---|---|
| Merk | Broadcom | |
| Product Type | Isolation Amplifier | |
| Minimum Supply Voltage | 4.5V | |
| Maximum Supply Voltage | 5.5V | |
| Number of Channels | 1 | |
| Mount Type | Through Hole | |
| Package Type | DIP-8 | |
| Pin Count | 8 | |
| Vos - Input Offset Voltage | 0.3 mV | |
| Isolation Type | Optical | |
| Isolation Voltage | 3750Vrms | |
| CMRR - Common Mode Rejection Ratio | 76dB | |
| Minimum Operating Temperature | -40°C | |
| Maximum Operating Temperature | 100°C | |
| Series | HCPL-7800A | |
| Length | 9.8mm | |
| Standards/Approvals | CSA, UL 1577, IEC/EN/DIN EN 60747-5-2 | |
| Height | 1.78mm | |
| Automotive Standard | No | |
| Alles selecteren | ||
|---|---|---|
Merk Broadcom | ||
Product Type Isolation Amplifier | ||
Minimum Supply Voltage 4.5V | ||
Maximum Supply Voltage 5.5V | ||
Number of Channels 1 | ||
Mount Type Through Hole | ||
Package Type DIP-8 | ||
Pin Count 8 | ||
Vos - Input Offset Voltage 0.3 mV | ||
Isolation Type Optical | ||
Isolation Voltage 3750Vrms | ||
CMRR - Common Mode Rejection Ratio 76dB | ||
Minimum Operating Temperature -40°C | ||
Maximum Operating Temperature 100°C | ||
Series HCPL-7800A | ||
Length 9.8mm | ||
Standards/Approvals CSA, UL 1577, IEC/EN/DIN EN 60747-5-2 | ||
Height 1.78mm | ||
Automotive Standard No | ||
Isolating Amplifiers, Avago Technologies
The range of isolation amplifier optocouplers from Avago Technologies is ideal for industrial environments where the optocoupler is used to insulate high voltages and isolate any unwanted signals. Sigma-delta modulator technology allows the current and voltage sensor families to provide precise measurements of phase current and bus voltage in motor drives, power inverters and voltage signals in general isolation circuits. These isolation amplifiers offer high CMR (common mode rejection) performance and built-in safety insulation. They are a suitable alternative to the Hall Effect isolation amplifiers, for current and voltage sensing in power converters.
Various types available including:
precision isolation amplifiers
miniature isolation amplifiers
precision optically isolated voltage sensors
isolated linear sensing ICs
isolation amplifiers with short circuit and overload detection
automotive isolation amplifiers