Broadcom 1-Channel Isolation Amplifier, 8-Pin 5.5 V PDIP
- RS-stocknr.:
- 450-907P
- Fabrikantnummer:
- HCPL-7840-300E
- Fabrikant:
- Broadcom
Bulkkorting beschikbaar
Subtotaal 10 eenheden (geleverd in een buis)*
€ 59,40
(excl. BTW)
€ 71,90
(incl. BTW)
GRATIS bezorging voor bestellingen van meer dan € 75,00
Op voorraad
- 1.238 stuk(s) klaar voor verzending vanaf een andere locatie
- Plus verzending 900 stuk(s) vanaf 08 april 2026
Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.
Aantal stuks | Per stuk |
|---|---|
| 10 - 24 | € 5,94 |
| 25 + | € 5,57 |
*prijsindicatie
- RS-stocknr.:
- 450-907P
- Fabrikantnummer:
- HCPL-7840-300E
- Fabrikant:
- Broadcom
Specificaties
Datasheets
Wetgeving en compliance
Productomschrijving
Zoek vergelijkbare producten door een of meer kenmerken te selecteren.
Alles selecteren | Attribuut | Waarde |
|---|---|---|
| Merk | Broadcom | |
| Product Type | Isolation Amplifier | |
| Minimum Supply Voltage | 5V | |
| Maximum Supply Voltage | 5.5V | |
| Number of Channels | 1 | |
| Mount Type | Surface | |
| Package Type | PDIP | |
| Pin Count | 8 | |
| Minimum Operating Temperature | -40°C | |
| Vos - Input Offset Voltage | 0.3 mV | |
| CMRR - Common Mode Rejection Ratio | 76.1dB | |
| Maximum Operating Temperature | 85°C | |
| Width | 6.35 mm | |
| Series | HCPL-7840 | |
| Height | 3.56mm | |
| Length | 9.8mm | |
| Standards/Approvals | No | |
| Automotive Standard | AEC-Q100 | |
| Alles selecteren | ||
|---|---|---|
Merk Broadcom | ||
Product Type Isolation Amplifier | ||
Minimum Supply Voltage 5V | ||
Maximum Supply Voltage 5.5V | ||
Number of Channels 1 | ||
Mount Type Surface | ||
Package Type PDIP | ||
Pin Count 8 | ||
Minimum Operating Temperature -40°C | ||
Vos - Input Offset Voltage 0.3 mV | ||
CMRR - Common Mode Rejection Ratio 76.1dB | ||
Maximum Operating Temperature 85°C | ||
Width 6.35 mm | ||
Series HCPL-7840 | ||
Height 3.56mm | ||
Length 9.8mm | ||
Standards/Approvals No | ||
Automotive Standard AEC-Q100 | ||
Isolating Amplifiers, Avago Technologies
The range of isolation amplifier optocouplers from Avago Technologies is ideal for industrial environments where the optocoupler is used to insulate high voltages and isolate any unwanted signals. Sigma-delta modulator technology allows the current and voltage sensor families to provide precise measurements of phase current and bus voltage in motor drives, power inverters and voltage signals in general isolation circuits. These isolation amplifiers offer high CMR (common mode rejection) performance and built-in safety insulation. They are a suitable alternative to the Hall Effect isolation amplifiers, for current and voltage sensing in power converters.
Various types available including:
precision isolation amplifiers
miniature isolation amplifiers
precision optically isolated voltage sensors
isolated linear sensing ICs
isolation amplifiers with short circuit and overload detection
automotive isolation amplifiers