Broadcom Isolation Amplifier, 8-Pin 6 V SOIC
- RS-stocknr.:
- 910-8229P
- Fabrikantnummer:
- ACNT-H79A-000E
- Fabrikant:
- Broadcom
Subtotaal 1 eenheid (geleverd in een buis)*
€ 9,46
(excl. BTW)
€ 11,45
(incl. BTW)
GRATIS bezorging voor bestellingen van meer dan € 90,00
Op voorraad
- Plus verzending 503 stuk(s) vanaf 25 mei 2026
Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.
Aantal stuks | Per stuk |
|---|---|
| 1 + | € 9,46 |
*prijsindicatie
- RS-stocknr.:
- 910-8229P
- Fabrikantnummer:
- ACNT-H79A-000E
- Fabrikant:
- Broadcom
Specificaties
Datasheets
Wetgeving en compliance
Productomschrijving
Zoek vergelijkbare producten door een of meer kenmerken te selecteren.
Alles selecteren | Attribuut | Waarde |
|---|---|---|
| Merk | Broadcom | |
| Product Type | Isolation Amplifier | |
| Minimum Supply Voltage | 3V | |
| Maximum Supply Voltage | 6V | |
| Mount Type | Surface | |
| Package Type | SOIC | |
| Pin Count | 8 | |
| Vos - Input Offset Voltage | -2 to 2 mV | |
| Isolation Type | Optical | |
| Isolation Voltage | 7500Vrms | |
| CMRR - Common Mode Rejection Ratio | 76dB | |
| Minimum Operating Temperature | -40°C | |
| Maximum Operating Temperature | 105°C | |
| Height | 3.4mm | |
| Length | 13.6mm | |
| Series | ACNT-H79 | |
| Standards/Approvals | IEC/EN/DIN EN 60747-5-5, CSA Component Acceptance Notice 5, UL 1577 | |
| Automotive Standard | No | |
| Alles selecteren | ||
|---|---|---|
Merk Broadcom | ||
Product Type Isolation Amplifier | ||
Minimum Supply Voltage 3V | ||
Maximum Supply Voltage 6V | ||
Mount Type Surface | ||
Package Type SOIC | ||
Pin Count 8 | ||
Vos - Input Offset Voltage -2 to 2 mV | ||
Isolation Type Optical | ||
Isolation Voltage 7500Vrms | ||
CMRR - Common Mode Rejection Ratio 76dB | ||
Minimum Operating Temperature -40°C | ||
Maximum Operating Temperature 105°C | ||
Height 3.4mm | ||
Length 13.6mm | ||
Series ACNT-H79 | ||
Standards/Approvals IEC/EN/DIN EN 60747-5-5, CSA Component Acceptance Notice 5, UL 1577 | ||
Automotive Standard No | ||
Isolating Amplifiers, Avago Technologies
The range of isolation amplifier optocouplers from Avago Technologies is ideal for industrial environments where the optocoupler is used to insulate high voltages and isolate any unwanted signals. Sigma-delta modulator technology allows the current and voltage sensor families to provide precise measurements of phase current and bus voltage in motor drives, power inverters and voltage signals in general isolation circuits. These isolation amplifiers offer high CMR (common mode rejection) performance and built-in safety insulation. They are a suitable alternative to the Hall Effect isolation amplifiers, for current and voltage sensing in power converters.
Various types available including:
precision isolation amplifiers
miniature isolation amplifiers
precision optically isolated voltage sensors
isolated linear sensing ICs
isolation amplifiers with short circuit and overload detection
automotive isolation amplifiers