RS PRO 3-Pole Panel Mount Isolator Switch -, IP65, 32A, 22 kW

RS-stocknr.:: 466-150
Artikelnummer Distrelec:: 304-14-375
Fabrikant:: RS PRO

RS PRO 3-Pole Panel Mount Isolator Switch -, IP65, 32A, 22 kW

Subtotaal (1 eenheid)*

€ 23,64

(excl. BTW)

€ 28,60

(incl. BTW)

GRATIS bezorging voor bestellingen van meer dan € 90,00

Op voorraad

Plus verzending 62 stuk(s) vanaf 27 april 2026
Plus verzending 365 stuk(s) vanaf 27 april 2026

Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.

Aantal stuks	Per stuk
1 +	€ 23,64

*prijsindicatie

RS-stocknr.:: 466-150
Artikelnummer Distrelec:: 304-14-375
Fabrikant:: RS PRO

Specificaties

Datasheets

Wetgeving en compliance

Productomschrijving

Zoek vergelijkbare producten door een of meer kenmerken te selecteren.

Alles selecteren	Attribuut	Waarde
	Merk	RS PRO
	Number of Poles	3
	Product Type	Isolator Switch
	Mount Type	Panel Mount
	IP Rating	IP65
	Electrical Phase	3
	Handle Colour	Red
	Switching Current	32A
	Series	LB
	Terminal Type	Screw
	Auxiliary Contacts Available	No
	Switching AC Voltage	750V ac
	Minimum Operating Temperature	-25°C
	Switching Power	22kW
	Padlock Compatibility	Yes
	Maximum Operating Temperature	40°C
	Standards/Approvals	UL, RoHS, IEC, EN
	Depth	70mm
	Width	100mm
	Length	125mm
	Hazardous Area Certification	NO

	Alles selecteren
	Merk RS PRO
	Number of Poles 3
	Product Type Isolator Switch
	Mount Type Panel Mount
	IP Rating IP65
	Electrical Phase 3
	Handle Colour Red
	Switching Current 32A
	Series LB
	Terminal Type Screw
	Auxiliary Contacts Available No
	Switching AC Voltage 750V ac
	Minimum Operating Temperature -25°C
	Switching Power 22kW
	Padlock Compatibility Yes
	Maximum Operating Temperature 40°C
	Standards/Approvals UL, RoHS, IEC, EN
	Depth 70mm
	Width 100mm
	Length 125mm
	Hazardous Area Certification NO

Land van herkomst:: IN

RS PRO Panel Mount (Padlockable)

This Panel Mount Non- fused isolator switch from our high-quality own brand RS PRO is designed for use with low voltage switchgear such as power distribution, load isolation and motor start/stop.

Features and Benefits

• Easy installation

• Compact and reliable

• Finger protection

• Padlockable for added security

• Single hole for front mounting

• 90° switching angle

• Forced open contacts

• Terminal screws in open contacts

• All switch rating at AC22

• Maximum panel thickness 3mm

• Minimum depth behind panel 102mm

• Maximum depth behind panel 117mm

• Actuator dimensions 64x64x32mm

• IP65 product rating (protection from total dust ingress)

What is the difference between a fused switch disconnector and a non-fused switch disconnector?

Unlike fused switch disconnectors, a non-fuse isolator switch does not use a fuse to break or put a circuit into isolation, they instead use a rotary to disconnect or isolate a circuit.

How does an isolator switch work?

This type of isolator switch can sometimes be referred to as a switch disconnector, this is because it has been created and designed to safely isolate a circuit whilst it is being used or maintained. This isolator switch breaks or isolates a circuit through the rotation of the rotary handle and locking ring. This type of non-fused isolator switch will be found isolating circuit breakers, transmission lines, transformers and a multitude of other applications.

RS PRO

RS PRO is our own brand range and brings you a wide range of high-quality, great value products offering you more choice. Trusted by engineers all over the world, every part of every RS PRO product has been rigorously tested against demanding industry standards; they’re only given the RS PRO Seal of Approval if we’re confident of their exceptional quality, which means you can be confident too.

Approvals

UL, CSA