Eaton 1-Pole Surface Isolator Switch -, IP65, 520A, 22 kW

RS-stocknr.:: 393-9715
Fabrikantnummer:: 207240 T5B-1-8200/I4/SVB
Fabrikant:: Eaton

Eaton 1-Pole Surface Isolator Switch -, IP65, 520A, 22 kW

Bulkkorting beschikbaar

Bekijk bulkkorting

Subtotaal (1 eenheid)*

€ 148,84

(excl. BTW)

€ 180,10

(incl. BTW)

GRATIS bezorging voor bestellingen van meer dan € 90,00

Op voorraad

Plus verzending 2 stuk(s) vanaf 21 juli 2026

Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.

Aantal stuks	Per stuk
1 - 4	€ 148,84
5 - 11	€ 144,28
12 +	€ 139,59

*prijsindicatie

RS-stocknr.:: 393-9715
Fabrikantnummer:: 207240 T5B-1-8200/I4/SVB
Fabrikant:: Eaton

Specificaties

Datasheets

Wetgeving en compliance

Productomschrijving

Zoek vergelijkbare producten door een of meer kenmerken te selecteren.

Alles selecteren	Attribuut	Waarde
	Merk	Eaton
	Product Type	Isolator Switch
	Number of Poles	1
	Mount Type	Surface
	IP Rating	IP65
	Electrical Phase	1
	Handle Colour	Red
	Switching Current	520A
	Terminal Type	Screw
	Auxiliary Contacts Available	Yes
	Series	T5B
	Padlock Compatibility	No
	Switching AC Voltage	230V ac
	Switching DC Voltage	60V dc
	Switching Power	22kW
	Minimum Operating Temperature	-25°C
	Maximum Operating Temperature	50°C
	Depth	125mm
	Width	160mm
	Standards/Approvals	CSA, IEC, UL
	Hazardous Area Certification	No
	Length	240mm

	Alles selecteren
	Merk Eaton
	Product Type Isolator Switch
	Number of Poles 1
	Mount Type Surface
	IP Rating IP65
	Electrical Phase 1
	Handle Colour Red
	Switching Current 520A
	Terminal Type Screw
	Auxiliary Contacts Available Yes
	Series T5B
	Padlock Compatibility No
	Switching AC Voltage 230V ac
	Switching DC Voltage 60V dc
	Switching Power 22kW
	Minimum Operating Temperature -25°C
	Maximum Operating Temperature 50°C
	Depth 125mm
	Width 160mm
	Standards/Approvals CSA, IEC, UL
	Hazardous Area Certification No
	Length 240mm

Vrijgesteld

Land van herkomst:: GB

Eaton Enclosed Isolator Switch

Eaton's isolator switch can sometimes be referred to as a switch disconnector, this is because it has been created and designed to safely isolate a circuit whilst it is being used or maintained. This isolator switch breaks or isolates a circuit through the rotation of the rotary handle and locking ring. This type of non-fused isolator switch will be found isolating circuit breakers, transmission lines, transformers and a multitude of other applications.

Features & Benefits

• The perfect solution for installing as a safety measure

• Used as an emergency switching off/emergency stop device

• The basic functions: used as a main switch, maintenance switch or manual override switch

• Thermoplastic, high impact surface mounting enclosure with an IP65 rating - this means that the enclosure part of the isolator has ingress protection against dust and is also protected against low-pressure jets of water that comes from all directions

• Built-in earth commoning block

• Lockable in the 0/OFF position, with up to three padlocks

• Totally insulated

• Red rotary handle and yellow locking ring, providing an aesthetically pleasing finish

What is the difference between a fused switch disconnector and a non-fused switch disconnector?

Unlike fused switch disconnectors, a non-fuse isolator switch does not use a fuse to break or put a circuit into isolation, they instead use a rotary to disconnect or isolate a circuit.

Note

Switch power/capacity refers to AC23A use at 380-440V