Eaton 1-Pole Screw Isolator Switch -, IP65, 100A, 30 kW

RS-stocknr.:: 431-6444
Fabrikantnummer:: 207275 T5-1-8200/I5/SVB
Fabrikant:: Eaton

Eaton 1-Pole Screw Isolator Switch -, IP65, 100A, 30 kW

Bulkkorting beschikbaar

Bekijk bulkkorting

Subtotaal (1 eenheid)*

€ 249,11

(excl. BTW)

€ 301,42

(incl. BTW)

GRATIS bezorging voor bestellingen van meer dan € 90,00

Voorradig bij de fabrikant

Klaar voor verzending vanaf 26 november 2026

Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.

Aantal stuks	Per stuk
1 - 4	€ 249,11
5 - 11	€ 241,47
12 +	€ 233,64

*prijsindicatie

RS-stocknr.:: 431-6444
Fabrikantnummer:: 207275 T5-1-8200/I5/SVB
Fabrikant:: Eaton

Specificaties

Datasheets

Wetgeving en compliance

Productomschrijving

Zoek vergelijkbare producten door een of meer kenmerken te selecteren.

Alles selecteren	Attribuut	Waarde
	Merk	Eaton
	Product Type	Isolator Switch
	Number of Poles	1
	Mount Type	Screw
	IP Rating	IP65
	Electrical Phase	1
	Handle Colour	Red
	Switching Current	100A
	Terminal Type	Screw
	Series	T51
	Auxiliary Contacts Available	Yes
	Switching AC Voltage	400V ac
	Minimum Operating Temperature	-25°C
	Switching Power	30kW
	Padlock Compatibility	Yes
	Switching DC Voltage	60V dc
	Maximum Operating Temperature	50°C
	Depth	125mm
	Hazardous Area Certification	ATEX
	Standards/Approvals	UL, IEC, EN, CSA, ATEX
	Width	200mm
	Length	280mm

	Alles selecteren
	Merk Eaton
	Product Type Isolator Switch
	Number of Poles 1
	Mount Type Screw
	IP Rating IP65
	Electrical Phase 1
	Handle Colour Red
	Switching Current 100A
	Terminal Type Screw
	Series T51
	Auxiliary Contacts Available Yes
	Switching AC Voltage 400V ac
	Minimum Operating Temperature -25°C
	Switching Power 30kW
	Padlock Compatibility Yes
	Switching DC Voltage 60V dc
	Maximum Operating Temperature 50°C
	Depth 125mm
	Hazardous Area Certification ATEX
	Standards/Approvals UL, IEC, EN, CSA, ATEX
	Width 200mm
	Length 280mm

Eaton Enclosed Isolator Switch

Eaton's isolator switch can sometimes be referred to as a switch disconnector, this is because it has been created and designed to safely isolate a circuit whilst it is being used or maintained. This isolator switch breaks or isolates a circuit through the rotation of the rotary handle and locking ring. This type of non-fused isolator switch will be found isolating circuit breakers, transmission lines, transformers and a multitude of other applications.

Features & Benefits

• The perfect solution for installing as a safety measure

• Used as an emergency switching off/emergency stop device

• The basic functions: used as a main switch, maintenance switch or manual override switch

• Thermoplastic, high impact surface mounting enclosure with an IP65 rating - this means that the enclosure part of the isolator has ingress protection against dust and is also protected against low-pressure jets of water that comes from all directions

• Built-in earth commoning block

• Lockable in the 0/OFF position, with up to three padlocks

• Totally insulated

• Red rotary handle and yellow locking ring, providing an aesthetically pleasing finish

What is the difference between a fused switch disconnector and a non-fused switch disconnector?

Unlike fused switch disconnectors, a non-fuse isolator switch does not use a fuse to break or put a circuit into isolation, they instead use a rotary to disconnect or isolate a circuit.

Note

Switch power/capacity refers to AC23A use at 380-440V