Allen Bradley 3-Pole Front, Base Isolator Switch -, IP66, 16A, 7.5 kW

RS-stocknr.:: 443-0736
Artikelnummer Distrelec:: 302-26-788
Fabrikantnummer:: 194E-Y16M-1753-4N
Fabrikant:: Allen Bradley

Allen Bradley 3-Pole Front, Base Isolator Switch -, IP66, 16A, 7.5 kW

Subtotaal (1 eenheid)*

€ 57,61

(excl. BTW)

€ 69,71

(incl. BTW)

GRATIS bezorging voor bestellingen van meer dan € 90,00

Op voorraad

15 stuk(s) klaar voor verzending
138 stuk(s) klaar voor verzending vanaf een andere locatie

Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.

Aantal stuks	Per stuk
1 +	€ 57,61

*prijsindicatie

RS-stocknr.:: 443-0736
Artikelnummer Distrelec:: 302-26-788
Fabrikantnummer:: 194E-Y16M-1753-4N
Fabrikant:: Allen Bradley

Specificaties

Datasheets

Wetgeving en compliance

Productomschrijving

Zoek vergelijkbare producten door een of meer kenmerken te selecteren.

Alles selecteren	Attribuut	Waarde
	Merk	Allen Bradley
	Product Type	Isolator Switch
	Number of Poles	3
	Mount Type	Front, Base
	IP Rating	IP66
	Electrical Phase	3
	Handle Colour	Red, Grey, Black, Yellow
	Series	194E
	Terminal Type	Wire
	Auxiliary Contacts Available	No
	Switching Current	16A
	Padlock Compatibility	No
	Switching Power	7.5kW
	Minimum Operating Temperature	-25°C
	Switching AC Voltage	690V ac
	Maximum Operating Temperature	60°C
	Standards/Approvals	UL, IEC, CSA, CE
	Hazardous Area Certification	No
	Length	120mm
	Depth	70mm
	Width	70mm

	Alles selecteren
	Merk Allen Bradley
	Product Type Isolator Switch
	Number of Poles 3
	Mount Type Front, Base
	IP Rating IP66
	Electrical Phase 3
	Handle Colour Red, Grey, Black, Yellow
	Series 194E
	Terminal Type Wire
	Auxiliary Contacts Available No
	Switching Current 16A
	Padlock Compatibility No
	Switching Power 7.5kW
	Minimum Operating Temperature -25°C
	Switching AC Voltage 690V ac
	Maximum Operating Temperature 60°C
	Standards/Approvals UL, IEC, CSA, CE
	Hazardous Area Certification No
	Length 120mm
	Depth 70mm
	Width 70mm

Vrijgesteld

Land van herkomst:: PL

Allen Bradley Enclosed Non-Fused Isolator Switch, 3 Pole, 7.5kW - 194E-Y16M-1753-4N

This non-fused isolator switch from Rockwell Automation's Allen Bradley range connects to your low-power machines to isolate power safely without using a fuse trip. When turned, the rotary lever locks the circuit in isolation. The switch can be used when a machine is still in use, meaning you can carry out maintenance checks safely. You'll find devices like this commonly applied to circuit breakers, transmission lines and transformers with a maximum current of 16 amps.

Features and Benefits

• IP66 (ingress protection) offers high resistance to water

• Can be padlocked in the off position for extra security

• IP20 finger-safe switch for insulation from active electrical currents

• Snap-on modular accessories for quick assembly

Standards and Certifications

• IEC (International Electrotechnical Commission)

• UL (Underwriters' Laboratories)

• CE (Conformité Européene)

• CSA (Canadian Standards Association)

How is this switch wired up?

The terminals support an M25 to M32 cable entry for small to medium-sized connectors. The third pole keeps the switch earthed to prevent electric shocks. In addition to the three-pole contact, an auxiliary contact can be added to the switch body in the enclosure to signal malfunctions.

Red Handled Enclosed Switch Disconnector

Ingress protection to IP65

M25/M32 cable entry

Fourth pole or auxiliary contact (see stock number 443-0770 typically) can be fitted to switch body in enclosure