Eaton 3-Pole Panel Mount Isolator Switch -, IP65, 125A, 45 kW

RS-stocknr.:: 621-7838
Fabrikantnummer:: 280897 P5-125/E
Fabrikant:: Eaton

Eaton 3-Pole Panel Mount Isolator Switch -, IP65, 125A, 45 kW

Bulkkorting beschikbaar

Subtotaal (1 eenheid)*

€ 211,62

(excl. BTW)

€ 256,06

(incl. BTW)

GRATIS bezorging voor bestellingen van meer dan € 90,00

Op voorraad

2 stuk(s) klaar voor verzending vanaf een andere locatie

Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.

Aantal stuks	Per stuk
1 - 4	€ 211,62
5 - 11	€ 205,15
12 +	€ 198,51

*prijsindicatie

RS-stocknr.:: 621-7838
Fabrikantnummer:: 280897 P5-125/E
Fabrikant:: Eaton

Specificaties

Datasheets

Wetgeving en compliance

Productomschrijving

Zoek vergelijkbare producten door een of meer kenmerken te selecteren.

Alles selecteren	Attribuut	Waarde
	Merk	Eaton
	Product Type	Isolator Switch
	Number of Poles	3
	Mount Type	Panel Mount
	IP Rating	IP65
	Electrical Phase	3
	Handle Colour	Black
	Terminal Type	Screw
	Switching Current	125A
	Series	P5-125
	Auxiliary Contacts Available	Yes
	Padlock Compatibility	No
	Minimum Operating Temperature	-25°C
	Switching AC Voltage	400V ac
	Switching Power	45kW
	Maximum Operating Temperature	50°C
	Length	112mm
	Width	88mm
	Hazardous Area Certification	ATEX
	Depth	91mm
	Standards/Approvals	EN, CSA, ATEX, UL, IEC

	Alles selecteren
	Merk Eaton
	Product Type Isolator Switch
	Number of Poles 3
	Mount Type Panel Mount
	IP Rating IP65
	Electrical Phase 3
	Handle Colour Black
	Terminal Type Screw
	Switching Current 125A
	Series P5-125
	Auxiliary Contacts Available Yes
	Padlock Compatibility No
	Minimum Operating Temperature -25°C
	Switching AC Voltage 400V ac
	Switching Power 45kW
	Maximum Operating Temperature 50°C
	Length 112mm
	Width 88mm
	Hazardous Area Certification ATEX
	Depth 91mm
	Standards/Approvals EN, CSA, ATEX, UL, IEC

Land van herkomst:: DE

Eaton Panel Mount Isolator Switch

Eaton's panel mount isolator switch can sometimes be referred to as a switch disconnector, this is because it has been created and designed to safely isolate a circuit whilst it is being used or maintained. This isolator switch breaks or isolates a circuit through the rotation of the rotary handle and locking ring, manually disconnecting the power supply to isolated parts of the circuit. This type of non-fused isolator switch will be found isolating circuit breakers, transmission lines, transformers and a multitude of other applications.

Features & Benefits

• The perfect solution for installing as a safety measure

• Used as an emergency switching off/emergency stop device

• The basic functions are when used as a main switch, maintenance switch or manual override switch

• Thermoplastic, high impact surface mounting enclosure with an IP65 rating - this means that the enclosure part of the isolator has ingress protection against dust and is also protected against low-pressure jets of water that comes from all directions

• Rated uninterrupted current of up to 32 A

• Lockable in the 0/OFF position, with up to three padlocks

• Red rotary handle and yellow locking ring, providing an aesthetically pleasing finish

• Common accessories: 262-3784, 219-1445, 219-1439

What is the difference between a fused switch disconnector and a non-fused switch disconnector?

Unlike fused switch disconnectors, a non-fuse isolator switch does not use a fuse to break or put a circuit into isolation, they instead use a rotary switch or knife-blade disconnect to isolate and de-energise a circuit. Commonly used in industrial automation and control settings.

Note

Eaton formerly known as Moeller