Eaton 3-Pole Panel Mount Isolator Switch -, IP65, 160A, 55 kW

RS-stocknr.:: 621-7894
Fabrikantnummer:: 280928 P5-160/V/SVB
Fabrikant:: Eaton

Eaton 3-Pole Panel Mount Isolator Switch -, IP65, 160A, 55 kW

Afbeelding representeert productcategorie

Bulkkorting beschikbaar

Bekijk bulkkorting

Subtotaal (1 eenheid)*

€ 337,23

(excl. BTW)

€ 408,05

(incl. BTW)

GRATIS bezorging voor bestellingen van meer dan € 90,00

Tijdelijk niet op voorraad

Verzending 3 stuk(s) vanaf 15 september 2026

Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.

Aantal stuks	Per stuk
1 - 4	€ 337,23
5 - 11	€ 326,93
12 +	€ 316,34

*prijsindicatie

RS-stocknr.:: 621-7894
Fabrikantnummer:: 280928 P5-160/V/SVB
Fabrikant:: Eaton

Specificaties

Datasheets

Wetgeving en compliance

Productomschrijving

Zoek vergelijkbare producten door een of meer kenmerken te selecteren.

Alles selecteren	Attribuut	Waarde
	Merk	Eaton
	Product Type	Isolator Switch
	Number of Poles	3
	Mount Type	Panel Mount
	IP Rating	IP65
	Electrical Phase	3
	Handle Colour	Red
	Switching Current	160A
	Series	P5-250
	Terminal Type	Screw
	Auxiliary Contacts Available	Yes
	Switching DC Voltage	42V dc
	Switching AC Voltage	400V ac
	Minimum Operating Temperature	-25°C
	Switching Power	55kW
	Padlock Compatibility	Yes
	Maximum Operating Temperature	50°C
	Hazardous Area Certification	ATEX
	Length	88mm
	Depth	91mm
	Width	88mm
	Standards/Approvals	ATEX, UL, IEC, VDE, EN, CSA

	Alles selecteren
	Merk Eaton
	Product Type Isolator Switch
	Number of Poles 3
	Mount Type Panel Mount
	IP Rating IP65
	Electrical Phase 3
	Handle Colour Red
	Switching Current 160A
	Series P5-250
	Terminal Type Screw
	Auxiliary Contacts Available Yes
	Switching DC Voltage 42V dc
	Switching AC Voltage 400V ac
	Minimum Operating Temperature -25°C
	Switching Power 55kW
	Padlock Compatibility Yes
	Maximum Operating Temperature 50°C
	Hazardous Area Certification ATEX
	Length 88mm
	Depth 91mm
	Width 88mm
	Standards/Approvals ATEX, UL, IEC, VDE, EN, CSA

P5−160/V/SVB Data Sheet

Eaton Rear of Panel Mounted Switch Disconnectors

The P and T range of non-fused switch disconnectors from Eaton provides safe switching, isolating and control. Robust and reliable, these high-performance devices are used primarily in industrial and engineering applications. With the added IP65 ingress protection rating they are ideal for use in harsh environments or applications that require extra protection.

Switch disconnectors are used to isolate electrical equipment before any essential maintenance or repair work can be completed. Switch disconnectors ensure electrical circuits are de-energized safely in accordance with the electricity at work regulations. Engineers and electricians are then able to carry out the necessary works without any electrical risks.

Features and Benefits

• Compact and durable

• Clear position indication

• Padlockable in the OFF position with up to 3 x 8 mm padlocks

• Rear mounting, easily and quickly fitted on to DIN rail or a base plate

• P series switches can be mounted in electrical cabinets or enclosures up to 400mm deep with an additional extension shaft

Applications

The Eaton P and T series of manually operated switch disconnectors are used in a wide range of industrial applications and installations. Some of the most common are

• Machine control panels

• Isolation of circuit breakers

• Transformers and transmission lines

• Switchgear panels

• Distribution panels

• Consumer units

Suitable Accessories include:

Extended shaft kits

• Part number 323-173 is an extended shaft kit for 20, 25 and 32A disconnect switches. They are 25mm long and up to 4 can be connected if required.

• Part number 323-189 is an extended shaft kit for 63,85 and 100A disconnect switches. They are 25mm long and up to 4 can be connected if required.

Neutral blocks

• Part number 333-495 for a 3 pole 25A add-on neutral block

• Part number 333-502 for a 3 pole 32A add-on neutral block

• Part number 333-518 for a 3 pole 63A add-on neutral block

Contact Blocks

• Part number 333-546 for a NO/NC 10A auxiliary contact block for the rear of the panel switch disconnectors. Maximum 2 blocks per switch

What is the difference between a fused switch disconnector and a non-fused switch disconnector?

Unlike fused switch disconnectors, a non-fuse isolator switch does not use a fuse to break or put a circuit into isolation, they instead use a rotary switch or knife-blade disconnect to isolate and de-energise a circuit. Commonly used in industrial automation and control settings.

Note

Eaton formerly known as Moeller