- RS-stocknr.:
- 629-2025
- Fabrikantnummer:
- 70020073 T0-1-102/I1H/SVB/K-CI-K1/2(RS629-2025)
- Fabrikant:
- Eaton
2 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
48 op voorraad - levertijd is 3 à 5 werkdagen (UK-voorraad)
Toegevoegd
Prijs 1 doos 1
€ 48,59
(excl. BTW)
€ 58,79
(incl. BTW)
Box(es) | Per Doos |
1 - 4 | € 48,59 |
5 - 11 | € 47,09 |
12 + | € 45,58 |
- RS-stocknr.:
- 629-2025
- Fabrikantnummer:
- 70020073 T0-1-102/I1H/SVB/K-CI-K1/2(RS629-2025)
- Fabrikant:
- Eaton
Wetgeving en compliance
- Land van herkomst:
- GB
Productomschrijving
Eaton Enclosed Isolator Switch
Eaton's isolator switch can sometimes be referred to as a switch disconnector, this is because it has been created and designed to safely isolate a circuit whilst it is being used or maintained. This isolator switch breaks or isolates a circuit through the rotation of the rotary handle and locking ring. This type of non-fused isolator switch will be found isolating circuit breakers, transmission lines, transformers and a multitude of other applications.
Features & Benefits
The perfect solution for installing as a safety measure
Used as an emergency switching off/emergency stop device
The basic functions: used as a main switch, maintenance switch or manual override switch
Thermoplastic, high impact surface mounting enclosure with an IP65 rating - this means that the enclosure part of the isolator has ingress protection against dust and is also protected against low-pressure jets of water that comes from all directions
Built-in earth commoning block
Lockable in the 0/OFF position, with up to three padlocks
Totally insulated
Red rotary handle and yellow locking ring, providing an aesthetically pleasing finish
Used as an emergency switching off/emergency stop device
The basic functions: used as a main switch, maintenance switch or manual override switch
Thermoplastic, high impact surface mounting enclosure with an IP65 rating - this means that the enclosure part of the isolator has ingress protection against dust and is also protected against low-pressure jets of water that comes from all directions
Built-in earth commoning block
Lockable in the 0/OFF position, with up to three padlocks
Totally insulated
Red rotary handle and yellow locking ring, providing an aesthetically pleasing finish
What is the difference between a fused switch disconnector and a non-fused switch disconnector?
Unlike fused switch disconnectors, a non-fuse isolator switch does not use a fuse to break or put a circuit into isolation, they instead use a rotary to disconnect or isolate a circuit.
Note
Switch power/capacity refers to AC23A use at 380-440V
Eaton Moeller Series Isolator Switch, IP65, 20A Maximum Current - 70011752 T0-1-102/I1H/SVB
This isolator switch by Eaton is a reliable and efficient solution for various applications. With a high power rating of 13 kW and a maximum operating temperature of +40 °C, this switch is designed to meet the demands of industrial settings. The IP65 rating ensures protection against dust and moisture, making it suitable for outdoor use as well.
Features & Benefits
• Allows for secure locking when the switch is in the off position
• 3 phase configuration for powering different systems
• Red handle for easy visibility in industrial environments
• Surface mount for convenient installation
• 2P design for efficient power distribution
• 400 V AC voltage ensures compatibility with various power sources
• 3 phase configuration for powering different systems
• Red handle for easy visibility in industrial environments
• Surface mount for convenient installation
• 2P design for efficient power distribution
• 400 V AC voltage ensures compatibility with various power sources
Applications
• Ideal for emergency shutdowns in case of any hazards
• Suitable for maintenance operations in industrial machinery
• Suitable for maintenance operations in industrial machinery
Can this isolator switch be used for high-power industrial equipment?
Yes, this isolator switch is designed for high-power applications with a power rating of 13 kW.
Will it provide protection against dust and moisture in outdoor environments?
The IP65 rating of this switch ensures protection against dust and moisture, making it suitable for outdoor use.
Is the red handle easy to identify in industrial settings?
Yes, the red handle of this switch provides easy visibility in industrial environments.
Note
Eaton formerly known as Moeller
Specificaties
Kenmerk | Waarde |
---|---|
Number of Poles | 2P |
Maximum Current | 20A |
Mounting Type | Surface Mount |
IP Rating | IP65 |
Power Rating | 13kW |
Voltage Rating | 400V ac |
Electrical Phase | 3 |
Handle Colour | Red |
Accepts Padlocks | Yes |
Series | Eaton Moeller |
Enclosed/Not Enclosed | Enclosed |
Switch Rating | 20A |
Length | 137mm |
Width | 80mm |
Depth | 110mm |
Terminal Type | Screw |
Maximum Operating Temperature | +40°C |
Minimum Operating Temperature | -25°C |
Throw Configuration | Single |