Eaton 3-Pole Surface Isolator Switch -, IP65, 25A, 13 kW

RS-stocknr.:: 773-0638
Fabrikantnummer:: 207294 P1-25/I2/SVB-SW
Fabrikant:: Eaton

Eaton 3-Pole Surface Isolator Switch -, IP65, 25A, 13 kW

Bulkkorting beschikbaar

Subtotaal (1 eenheid)*

€ 58,76

(excl. BTW)

€ 71,10

(incl. BTW)

GRATIS bezorging voor bestellingen van meer dan € 90,00

Op voorraad

4 stuk(s) klaar voor verzending
12 stuk(s) klaar voor verzending vanaf een andere locatie
Plus verzending 9 stuk(s) vanaf 29 april 2026

Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.

Aantal stuks	Per stuk
1 - 4	€ 58,76
5 - 11	€ 56,94
12 +	€ 55,13

*prijsindicatie

RS-stocknr.:: 773-0638
Fabrikantnummer:: 207294 P1-25/I2/SVB-SW
Fabrikant:: Eaton

Specificaties

Datasheets

Wetgeving en compliance

Productomschrijving

Zoek vergelijkbare producten door een of meer kenmerken te selecteren.

Alles selecteren	Attribuut	Waarde
	Merk	Eaton
	Number of Poles	3
	Product Type	Isolator Switch
	Mount Type	Surface
	IP Rating	IP65
	Electrical Phase	3
	Handle Colour	Black
	Series	P1-25
	Switching Current	25A
	Auxiliary Contacts Available	No
	Terminal Type	Screw
	Switching Power	13kW
	Minimum Operating Temperature	-25°C
	Padlock Compatibility	Yes
	Switching AC Voltage	400V ac
	Switching DC Voltage	60V dc
	Maximum Operating Temperature	40°C
	Length	160mm
	Hazardous Area Certification	ATEX
	Standards/Approvals	VDE, EN, UL, ATEX, CSA, IEC
	Depth	80mm
	Width	100mm

	Alles selecteren
	Merk Eaton
	Number of Poles 3
	Product Type Isolator Switch
	Mount Type Surface
	IP Rating IP65
	Electrical Phase 3
	Handle Colour Black
	Series P1-25
	Switching Current 25A
	Auxiliary Contacts Available No
	Terminal Type Screw
	Switching Power 13kW
	Minimum Operating Temperature -25°C
	Padlock Compatibility Yes
	Switching AC Voltage 400V ac
	Switching DC Voltage 60V dc
	Maximum Operating Temperature 40°C
	Length 160mm
	Hazardous Area Certification ATEX
	Standards/Approvals VDE, EN, UL, ATEX, CSA, IEC
	Depth 80mm
	Width 100mm

P1-25-I2-SVB-SW-Datasheet

Land van herkomst:: GB

Eaton Enclosed Non-Fused Switch Disconnector – P1 Series

Eaton's isolator switch can sometimes be referred to as a switch disconnector, this is because it has been created and designed to safely isolate a circuit whilst it is being used or maintained. This isolator switch breaks or isolates a circuit through the rotation of the rotary handle and locking ring. This type of non-fused isolator switch will be found isolating circuit breakers, transmission lines, transformers and a multitude of other applications.;Introducing the P1 range of enclosed switch disconnectors from Eaton. On these switches, the manual operator acts directly on the contacts, the contacts are positively opened on de-energisation. These switch disconnectors can be used as mains switches, maintenance switches and manual overrode switches.

Features & Benefits

• Thermoplastic enclosure

• Surface mounting

• Black rotary handle and locking ring

• Lockable in the 0 (Off) position

• IP65 ingress protection rating

• The perfect solution for installing as a safety measure

What is the difference between a fused switch disconnector and a non-fused switch disconnector?

Unlike fused switch disconnectors, a non-fuse isolator switch does not use a fuse to break or put a circuit into isolation, they instead use a rotary to disconnect or isolate a circuit.

Note

Eaton formerly known as Moeller