Eaton 3-Pole Surface Isolator Switch -, IP65, 190A, 13 kW

RS-stocknr.:: 805-5584
Fabrikantnummer:: 172834 P1-25/XM
Fabrikant:: Eaton

Eaton 3-Pole Surface Isolator Switch -, IP65, 190A, 13 kW

Bulkkorting beschikbaar

Bekijk bulkkorting

Subtotaal (1 eenheid)*

€ 38,15

(excl. BTW)

€ 46,16

(incl. BTW)

GRATIS bezorging voor bestellingen van meer dan € 90,00

Op voorraad

Plus verzending 8 stuk(s) vanaf 21 september 2026

Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.

Aantal stuks	Per stuk
1 - 4	€ 38,15
5 - 11	€ 36,97
12 +	€ 35,80

*prijsindicatie

RS-stocknr.:: 805-5584
Fabrikantnummer:: 172834 P1-25/XM
Fabrikant:: Eaton

Specificaties

Datasheets

Wetgeving en compliance

Productomschrijving

Zoek vergelijkbare producten door een of meer kenmerken te selecteren.

Alles selecteren	Attribuut	Waarde
	Merk	Eaton
	Product Type	Isolator Switch
	Number of Poles	3
	Mount Type	Surface
	IP Rating	IP65
	Electrical Phase	3
	Terminal Type	Screw
	Switching Current	190A
	Series	P1-25
	Auxiliary Contacts Available	Yes
	Padlock Compatibility	No
	Minimum Operating Temperature	-25°C
	Switching DC Voltage	60V dc
	Switching AC Voltage	230V ac
	Switching Power	13kW
	Maximum Operating Temperature	50°C
	Width	70mm
	Depth	75mm
	Hazardous Area Certification	No
	Standards/Approvals	CSA, UL, IEC
	Length	49mm

	Alles selecteren
	Merk Eaton
	Product Type Isolator Switch
	Number of Poles 3
	Mount Type Surface
	IP Rating IP65
	Electrical Phase 3
	Terminal Type Screw
	Switching Current 190A
	Series P1-25
	Auxiliary Contacts Available Yes
	Padlock Compatibility No
	Minimum Operating Temperature -25°C
	Switching DC Voltage 60V dc
	Switching AC Voltage 230V ac
	Switching Power 13kW
	Maximum Operating Temperature 50°C
	Width 70mm
	Depth 75mm
	Hazardous Area Certification No
	Standards/Approvals CSA, UL, IEC
	Length 49mm

Vrijgesteld

Land van herkomst:: GB

Eaton P1-25/XM

Eaton's isolator switch can sometimes be referred to as a switch disconnector, this is because it has been created and designed to safely isolate a circuit whilst it is being used or maintained.

• The perfect solution for installing as a safety measure

• Used as an emergency switching off/emergency stop device

• The basic functions are when used as a main switch, maintenance switch or manual override switch

• 3 pole

• Auxiliary contact or neutral conductor must be fitted by the user

• IP65 rating - this means that the enclosure part of the isolator has ingress protection against dust and is also protected against low-pressure jets of water that comes from all directions

• Rear mounting

• Features an ambient operating temperature of -25 to +50 °C

• Has a mechanical shock resistance of 15 g

• M4 screw terminal

• Rear mounting

Eaton Non-Fused Switch Disconnectors - P1 Series Isolators

The P1 series of switch disconnectors from Eaton are compact and robust. This range of isolator switches is suitable for use in applications where there is a need to manually power down and disconnect electrical equipment for servicing and maintenance by cutting the power supply to isolated parts of the circuit. These disconnect switches can also be used as safety switches.

With an IP65 degree of protection, the devices are suited to hard-wearing industrial environments with a rated uninterrupted current of up to 32 A. Available in four different mounting options (surface mounting, flush mounting, rear mounting, and service distribution board mounting). These switches can be selected and configured in a multitude of contact sequences.

With the metal extension shaft accessories, the P1 switches can be mounted in electrical cabinets of up to 600 mm deep and with several Handle and Shaft options a solution can be found for every application.

• Performs local isolation, manual override & safety switch functions

• P1 Series fit a standard front plate of 45 x 45 mm

• For spare rotary thumb stick (black) see stock no. 176-9759

What is the difference between a fused switch disconnector and a non-fused switch disconnector?

Unlike fused switch disconnectors, a non-fuse isolator switch does not use a fuse to break or put a circuit into isolation, they instead use a rotary switch or knife-blade disconnect to isolate and de-energise a circuit. Commonly used in industrial automation and control settings.

Note

Eaton formerly known as Moeller