Pramet, 4.76 mm Height, 93 ° Approach, 11.6 mm Length
- RS-stocknr.:
- 866-0414
- Fabrikantnummer:
- DNMG 110404E-FM:T9315
- Fabrikant:
- Pramet
Subtotaal (1 doos van 10 eenheden)*
€ 162,90
(excl. BTW)
€ 197,11
(incl. BTW)
Informatie over voorraden is momenteel niet toegankelijk - Controleer het later nog eens opnieuw
Dozen | Per Doos | Per stuk* |
|---|---|---|
| 1 + | € 162,90 | € 16,29 |
*prijsindicatie
- RS-stocknr.:
- 866-0414
- Fabrikantnummer:
- DNMG 110404E-FM:T9315
- Fabrikant:
- Pramet
Specificaties
Datasheets
Wetgeving en compliance
Productomschrijving
Zoek vergelijkbare producten door een of meer kenmerken te selecteren.
Alles selecteren | Attribuut | Waarde |
|---|---|---|
| Merk | Pramet | |
| Product Type | Lathe Part | |
| Approach Angle | 93° | |
| Length | 11.6mm | |
| Height | 4.76mm | |
| Number of Cutting Edges | 4 | |
| Inscribed Circle | 9.5mm | |
| Standards/Approvals | No | |
| Shape | Diamond | |
| Alles selecteren | ||
|---|---|---|
Merk Pramet | ||
Product Type Lathe Part | ||
Approach Angle 93° | ||
Length 11.6mm | ||
Height 4.76mm | ||
Number of Cutting Edges 4 | ||
Inscribed Circle 9.5mm | ||
Standards/Approvals No | ||
Shape Diamond | ||
Vrijgesteld
- Land van herkomst:
- CZ
Pramet DNMG Insert
For use with DDJN, PDJN, PDNN, PDXN and PDUN Holders & Bars.
T9315
Excellent for machining Steel
Acceptable for Cast Iron and Hardened Steels
T9325
Excellent for machining Steel and Stainless Steel
Acceptable for Cast Iron
Turning Inserts
Breakdown of ISO Reference
Higher Number = Tougher / Resistant to Impact
Lower Number = Harder / Wear Resistant
TU5525 the New Universal Turning Grade
TU5525 is a truly universal tuning grade suitable for cutting Steel, Stainless Steel, Cast Iron and heat resistant Aaloys. There is no need to hold stock of a multitude of grades reducing the cost of inventory and time wasted changing inserts. One insert for almost all applications.
TP2135 a Tough Impact Resistant Grade
If insert breakage or chipping of the cutting edge is a problem TP2135 may be the answer. Some application do not offer the cutting edge a constant cutting surface whether from a non round part or holes in the part this constant impact on the cutting edge can lead to insert failing. TP2135 is designed to take higher impact loads giving a more secure cutting edge, suitable for cutting steel, stainless steel and heat resistant alloys.