- RS-stocknr.:
- 136-3971
- Fabrikantnummer:
- KITXLCFN-32-4-T8330
- Fabrikant:
- Pramet
4 op voorraad - levertijd is 1 werkdag(en)
Toegevoegd
Prijs 1 set
€ 234,27
(excl. BTW)
€ 283,47
(incl. BTW)
Kit(s) | Per set |
1 + | € 234,27 |
- RS-stocknr.:
- 136-3971
- Fabrikantnummer:
- KITXLCFN-32-4-T8330
- Fabrikant:
- Pramet
Datasheets
Wetgeving en compliance
N.v.t.
- Land van herkomst:
- CZ
Productomschrijving
Pramet Lathe Tool, 140g Weight, 5.1mm Thickness - KITXLCFN-32-4-T8330
Section off your workpiece for precise cutting with this lathe tool from Pramet. It creates a groove through the piece of metal you're machining, allowing you to separate the finished part from the rest of the material. The unit is 5.1mm thick, so it won't deflect or chatter while it's in use. This gives you the stability you need for a neat job. It's commonly used to cut specific lengths off a long metal rod.
Features & Benefits
Comes with an extractor for easy removal after use
Light weight of 140g means it's easy to handle during operation
Light weight of 140g means it's easy to handle during operation
Applications
Automotive manufacturing
Construction sites
Machine building
Construction sites
Machine building
How do I use this lathe tool?
Carefully feed it into the desired location on your workpiece. You should slow down your lathe's spindle to minimise the cutting force and ensure a clean separation.
Parting Off Set
Specificaties
Kenmerk | Waarde |
---|---|
Type | Parting Off Turning Tool |
Lathe Part | Lathe Insert |
Grade | T8330 |
Thickness | 4.1mm |