ROHM LED Driver, 45V, 5 V 2 A 48-Pin HTSSOP
- RS-stocknr.:
- 265-231P
- Fabrikantnummer:
- BD18397EUV-ME2
- Fabrikant:
- ROHM
Bulkkorting beschikbaar
Bekijk bulkkortingSubtotaal 100 eenheden (geleverd op een doorlopende strip)*
€ 538,10
(excl. BTW)
€ 651,10
(incl. BTW)
Informatie over voorraden is momenteel niet toegankelijk - Controleer het later nog eens opnieuw
Aantal stuks | Per stuk |
|---|---|
| 100 - 240 | € 5,381 |
| 250 + | € 4,984 |
*prijsindicatie
- RS-stocknr.:
- 265-231P
- Fabrikantnummer:
- BD18397EUV-ME2
- Fabrikant:
- ROHM
Specificaties
Datasheets
Wetgeving en compliance
Productomschrijving
Zoek vergelijkbare producten door een of meer kenmerken te selecteren.
Alles selecteren | Attribuut | Waarde |
|---|---|---|
| Merk | ROHM | |
| Product Type | LED Driver | |
| Output Current | 2A | |
| Input Voltage | 45V, 5V | |
| Dimming Operation | PWM | |
| Package Type | HTSSOP | |
| Number of Pins | 48 | |
| Maximum Output Voltage | 60V | |
| Minimum Operating Temperature | -40°C | |
| Maximum Operating Temperature | 150°C | |
| Standards/Approvals | RoHS | |
| Width | 8.1mm | |
| Series | BD18397/98xxx-M | |
| Length | 12.5mm | |
| Height | 1mm | |
| Minimum Output Voltage | 2.5V | |
| Automotive Standard | AEC-Q100 | |
| Alles selecteren | ||
|---|---|---|
Merk ROHM | ||
Product Type LED Driver | ||
Output Current 2A | ||
Input Voltage 45V, 5V | ||
Dimming Operation PWM | ||
Package Type HTSSOP | ||
Number of Pins 48 | ||
Maximum Output Voltage 60V | ||
Minimum Operating Temperature -40°C | ||
Maximum Operating Temperature 150°C | ||
Standards/Approvals RoHS | ||
Width 8.1mm | ||
Series BD18397/98xxx-M | ||
Length 12.5mm | ||
Height 1mm | ||
Minimum Output Voltage 2.5V | ||
Automotive Standard AEC-Q100 | ||
The ROHM 2 channel synchronous buck DC/DC LED driver utilizes an on time topology, supporting a near fixed switching frequency and fast switching duty regulation. It employs an average LED current feedback buck topology for precise LED current regulation across a wide input and LED output range. This driver supports individual 10 bit analogue dimming and 10 bit PWM dimming, programmable via a 10 bit register through SPI.
AEC-Q100 qualified
ISO 26262 process compliant to support ASIL B
On time topology for near fixed frequency switching
Average LED current regulation
Protection diodes less for current sense pins
Cycle by cycle switch over current protection
Thermal shutdown
Thermal sensor reading
Serial peripheral interface