STMicroelectronics LED Driver ICLED Driver, -0.4/7 V 100 mA 16-Pin HTSSOP
- RS-stocknr.:
- 203-3414P
- Fabrikantnummer:
- LED8102SXTTR
- Fabrikant:
- STMicroelectronics
Bulkkorting beschikbaar
Bekijk bulkkortingSubtotaal 50 eenheden (geleverd op een doorlopende strip)*
€ 35,10
(excl. BTW)
€ 42,45
(incl. BTW)
GRATIS bezorging voor bestellingen van meer dan € 90,00
Tijdelijk niet op voorraad
- Verzending vanaf 04 februari 2027
Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.
Aantal stuks | Per stuk |
|---|---|
| 50 - 90 | € 0,702 |
| 100 - 240 | € 0,694 |
| 250 - 490 | € 0,685 |
| 500 + | € 0,677 |
*prijsindicatie
- RS-stocknr.:
- 203-3414P
- Fabrikantnummer:
- LED8102SXTTR
- Fabrikant:
- STMicroelectronics
Specificaties
Datasheets
Wetgeving en compliance
Productomschrijving
Zoek vergelijkbare producten door een of meer kenmerken te selecteren.
Alles selecteren | Attribuut | Waarde |
|---|---|---|
| Merk | STMicroelectronics | |
| Output Current | 100mA | |
| Product Type | LED Driver ICLED Driver | |
| Input Voltage Type | DC | |
| Mount Type | Through Hole | |
| Package Type | HTSSOP | |
| Number of Pins | 16 | |
| Maximum Output Voltage | 7V | |
| Minimum Operating Temperature | -40°C | |
| Maximum Operating Temperature | 125°C | |
| Series | LED8102SXTTR | |
| Height | 0.5mm | |
| Standards/Approvals | RoHS | |
| Length | 3mm | |
| Automotive Standard | No | |
| Alles selecteren | ||
|---|---|---|
Merk STMicroelectronics | ||
Output Current 100mA | ||
Product Type LED Driver ICLED Driver | ||
Input Voltage Type DC | ||
Mount Type Through Hole | ||
Package Type HTSSOP | ||
Number of Pins 16 | ||
Maximum Output Voltage 7V | ||
Minimum Operating Temperature -40°C | ||
Maximum Operating Temperature 125°C | ||
Series LED8102SXTTR | ||
Height 0.5mm | ||
Standards/Approvals RoHS | ||
Length 3mm | ||
Automotive Standard No | ||
The STMicroelectronics LED8102S is a monolithic, 8-channel LED driver with direct switch control. It is equipped with a thermal management that protects the device forcing it in shutdown (typically: power-off at 170 °C with 15 °C hysteresis to restart). LEDs brightness can be adjusted with a global PWM signal applied to the output enable pin (OE), on all active outputs. The outputs can be connected in parallel, or left unconnected if not used, as required by application. Thermal protection switches OFF only the output channels.
Programmable current through external resistor
Thermal shutdown
Available in high thermal efficiency TSSOP exposed pad package