STMicroelectronics Lighting Controller, 4.5/42 V 200 mA 24-Pin QFN
- RS-stocknr.:
- 275-1304P
- Fabrikantnummer:
- ALED7709ATR
- Fabrikant:
- STMicroelectronics
Bulkkorting beschikbaar
Subtotaal 50 eenheden (geleverd op een doorlopende strip)*
€ 142,00
(excl. BTW)
€ 172,00
(incl. BTW)
GRATIS bezorging voor bestellingen van meer dan € 90,00
Op voorraad
- Plus verzending 196 stuk(s) vanaf 25 mei 2026
Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.
Aantal stuks | Per stuk |
|---|---|
| 50 - 98 | € 2,84 |
| 100 - 248 | € 2,455 |
| 250 - 998 | € 2,335 |
| 1000 + | € 1,79 |
*prijsindicatie
- RS-stocknr.:
- 275-1304P
- Fabrikantnummer:
- ALED7709ATR
- Fabrikant:
- STMicroelectronics
Specificaties
Datasheets
Wetgeving en compliance
Productomschrijving
Zoek vergelijkbare producten door een of meer kenmerken te selecteren.
Alles selecteren | Attribuut | Waarde |
|---|---|---|
| Merk | STMicroelectronics | |
| Product Type | Lighting Controller | |
| Output Current | 200mA | |
| Input Voltage Type | DC | |
| Dimming Operation | Analogue | |
| Mount Type | Surface | |
| Package Type | QFN | |
| Number of Pins | 24 | |
| Maximum Output Voltage | 42V | |
| Minimum Operating Temperature | -40°C | |
| Maximum Operating Temperature | 150°C | |
| Standards/Approvals | RoHS | |
| Length | 5.1mm | |
| Series | ALED7709ATR | |
| Height | 0.9mm | |
| Minimum Output Voltage | 4.5V | |
| Automotive Standard | AEC-Q100 | |
| Alles selecteren | ||
|---|---|---|
Merk STMicroelectronics | ||
Product Type Lighting Controller | ||
Output Current 200mA | ||
Input Voltage Type DC | ||
Dimming Operation Analogue | ||
Mount Type Surface | ||
Package Type QFN | ||
Number of Pins 24 | ||
Maximum Output Voltage 42V | ||
Minimum Operating Temperature -40°C | ||
Maximum Operating Temperature 150°C | ||
Standards/Approvals RoHS | ||
Length 5.1mm | ||
Series ALED7709ATR | ||
Height 0.9mm | ||
Minimum Output Voltage 4.5V | ||
Automotive Standard AEC-Q100 | ||
- Land van herkomst:
- TH
The STMicroelectronics automotive grade LED drivers combining a boost or SEPIC controller and four low-side constant current sinkers, designed to drive strings of high brightness LEDs. The switching converter section provides the supply rail for the LED strings whose value is constantly optimized for maximum efficiency. The boost or SEPIC controller supports the external synchronization and spread spectrum. It can work simultaneously or exclusively in standalone mode (SAM), controlled only by PWMI signal and in bus driven mode (BDM) through an I2C serial interface.
AEC-Q100 Grade1 qualified
Supports battery cranking events down to 4 V supply