Vega VEGAWAVE 61 Series Tuning Fork Level Switch, Horizontal, ATEX-Rated, Klingersil C-4400, Housing Polybutylene

Subtotaal (1 eenheid)*

€ 445,20

(excl. BTW)

€ 538,69

(incl. BTW)

Add to Basket
selecteer of typ hoeveelheid
Informatie over voorraden is momenteel niet toegankelijk - Controleer het later nog eens opnieuw
Aantal stuks
Per stuk
1 +€ 445,20

*prijsindicatie

RS-stocknr.:
386-957
Fabrikantnummer:
WAVES61.EXX2RA
Fabrikant:
Vega
Zoek vergelijkbare producten door een of meer kenmerken te selecteren.
Alles selecteren

Merk

Vega

Device Type

Tuning Fork

Product Type

Level Switch

Mount Type

Horizontal

Housing Material

Polybutylene Terephthalate, Aluminium

Minimum Operating Temperature

-40°C

Maximum Operating Temperature

80°C

Maximum DC Voltage

72V dc

Maximum AC Voltage

253V ac

Maximum Current

3A

Maximum Pressure

25bar

Gasket Material

Klingersil C-4400

Standards/Approvals

ATEX II 1/3 D IP66 T

Series

VEGAWAVE 61

Hazardous Area Certification

ATEX

Vrijgesteld

Land van herkomst:
DE

Vega Vibrating Level Switch


The Vega vibrating level switch has a relay (DPDT) output. This level switch detects the minimum or maximum level reliably. The tuning fork is ideal for use in adhesive and abrasive products as well as in bulk solids with low density. It detects light bulk solids, even those down to 8g/L. The robust construction also makes it possible to use it in very heavy media. Vibrating Liquid/Solid Level Probes – Squings.

All of these probes are maintenance-free and have an external LED switch status indication.

Features and Benefits


The supply voltage ranging from 20VAC to 253VAC and 20VDC to 72VDC

Process fitting material is thread from G 1½ A or 1½ NPT

Easy setup without adjustment

Product-independent switching point

Rugged sensor construction

Insensitive to build-up and statically charged products

maintenance-free and does not wear

External LED switch

Housing material PBT (plastic)

Housing protection

Switching current is 400mA (maximum)

Blocking current is greater than 100μA

Switching delay ON: approx. 0.5 seconds/OFF: approx. 1 second

Probe length is 220mm (8.7in)

Applications


Ideal level switch for almost all bulk solids applications

Used for overfill and low-level detection in media like grain, fine aggregates, sand and heavier powders such as cement and metal oxides

Applications in heavy, fine to coarse bulk solids

Certifications


IP66 rated

IP67 rated

ATEX II 1/3 D IP66 T

Gerelateerde Links