Endress+Hauser FTI26 Series Capacitance Level Switch Level Switch, Threaded Mount, Housing Polycarbonate

RS-stocknr.:: 256-6166
Artikelnummer Distrelec:: 303-51-203
Fabrikantnummer:: FTI26-AA4UWDG
Fabrikant:: Endress+Hauser

Endress+Hauser FTI26 Series Capacitance Level Switch Level Switch, Threaded Mount, Housing Polycarbonate

Subtotaal (1 eenheid)*

€ 161,60

(excl. BTW)

€ 195,54

(incl. BTW)

GRATIS bezorging voor bestellingen van meer dan € 90,00

Op voorraad

10 stuk(s) klaar voor verzending

Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.

Aantal stuks	Per stuk
1 +	€ 161,60

*prijsindicatie

RS-stocknr.:: 256-6166
Artikelnummer Distrelec:: 303-51-203
Fabrikantnummer:: FTI26-AA4UWDG
Fabrikant:: Endress+Hauser

Specificaties

Datasheets

Wetgeving en compliance

Productomschrijving

Zoek vergelijkbare producten door een of meer kenmerken te selecteren.

Alles selecteren	Attribuut	Waarde
	Merk	Endress+Hauser
	Device Type	Capacitance Level Switch
	Product Type	Level Switch
	Mount Type	Threaded Mount
	Housing Material	Polycarbonate
	Cable Length	5m
	Minimum Operating Temperature	-20°C
	Maximum Operating Temperature	80°C
	Maximum Pressure	6bar
	Standards/Approvals	CE mark
	Series	FTI26
	Hazardous Area Certification	No

	Alles selecteren
	Merk Endress+Hauser
	Device Type Capacitance Level Switch
	Product Type Level Switch
	Mount Type Threaded Mount
	Housing Material Polycarbonate
	Cable Length 5m
	Minimum Operating Temperature -20°C
	Maximum Operating Temperature 80°C
	Maximum Pressure 6bar
	Standards/Approvals CE mark
	Series FTI26
	Hazardous Area Certification No

Land van herkomst:: DE

Endress+Hauser FTI26 Series Level Switch, +60°C Maximum Operating Temperature, 6 Bar Maximum Pressure - FTI26-AA4UWDG

This level switch is a capacitance-based detector designed for liquid level monitoring in industrial installations. It provides point-level detection via a threaded mounting arrangement and communicates using an IO-Link interface, making it suitable for integration into automated process systems. The sensor is housed in polycarbonate and features a chemical-resistant EPDM sealing element for general-purpose environments.

Features and Benefits:

• IO-Link interface enables digital integration with control systems
• Threaded mount allows straightforward panel or vessel installation
• Operating range from -20°C to +60°C supports varied process temperatures
• Low operating current 20 mA reduces power draw on control circuits
• 5m cable provides extended reach without conduit runs

Applications

• Suitable for level detection in storage tanks with threaded ports
• Ideal for automated process lines requiring IO-Link communication
• Used for monitoring non-hazardous area liquids in general industry
• Can be used for chemical handling where EPDM sealing is acceptable

What housing material protects the sensor against mechanical impacts?

The enclosure is made from polycarbonate, chosen for its toughness and resistance to cracking.

How is the sensor sealed to minimise ingress at the mounting point?

An EPDM gasket provides the sealing interface between the sensor and the threaded mounting.

What temperature conditions can it tolerate in continuous operation?

It is specified for operation across a temperature span from -20°C up to +60°C.

Is it suitable for classified hazardous areas?

The device has no hazardous area certification and is intended for use outside classified zones.

What electrical interface does it use for signal and configuration?

The unit communicates via IO-Link and requires a supporting interface for digital integration.