Tempatron SLX Series Liquid Level Sensor Level Probe, PCB
- RS-stocknr.:
- 439-0082
- Fabrikantnummer:
- SLX4
- Fabrikant:
- Tempatron
Subtotaal (1 eenheid)*
€ 45,19
(excl. BTW)
€ 54,68
(incl. BTW)
Informatie over voorraden is momenteel niet toegankelijk - Controleer het later nog eens opnieuw
Aantal stuks | Per stuk |
|---|---|
| 1 + | € 45,19 |
*prijsindicatie
- RS-stocknr.:
- 439-0082
- Fabrikantnummer:
- SLX4
- Fabrikant:
- Tempatron
Specificaties
Datasheets
Wetgeving en compliance
Productomschrijving
Zoek vergelijkbare producten door een of meer kenmerken te selecteren.
Alles selecteren | Attribuut | Waarde |
|---|---|---|
| Merk | Tempatron | |
| Device Type | Liquid Level Sensor | |
| Product Type | Level Probe | |
| Mount Type | PCB | |
| Minimum Operating Temperature | -20°C | |
| Maximum Operating Temperature | 65°C | |
| Maximum DC Voltage | 5V dc | |
| Maximum AC Voltage | 230V ac | |
| Maximum Current | 50mA | |
| Standards/Approvals | No | |
| Series | SLX | |
| Hazardous Area Certification | No | |
| Alles selecteren | ||
|---|---|---|
Merk Tempatron | ||
Device Type Liquid Level Sensor | ||
Product Type Level Probe | ||
Mount Type PCB | ||
Minimum Operating Temperature -20°C | ||
Maximum Operating Temperature 65°C | ||
Maximum DC Voltage 5V dc | ||
Maximum AC Voltage 230V ac | ||
Maximum Current 50mA | ||
Standards/Approvals No | ||
Series SLX | ||
Hazardous Area Certification No | ||
- Land van herkomst:
- GB
Selex™ PCB Mount Liquid Sensors
For use with either standard or OEM designed metallic electrodes, one of which can be the liquid container
Uses metallic probes to sense liquid by detecting free ions
High immunity to probe deposits
PCB mounting, high or low liquid level sensing
Built in delay to avoid spurious switching
Full galvanic isolation
Liquid Level Relays are used to monitor the levels of conductive liquids, and are available in Up/Down, Minimum, Maximum, and Fill/Empty variations. Liquid Level Relays are straightforward to install and safe to use.
Application Examples
Liquid Level Relays (Conductive Level Sensors) are used in a wide variety of applications including waste water management and the monitoring and management of corrosive liquid media, and designed specifically to provide for the:
Monitoring and control of liquid levels
Protection of pumps against dry running
Ability to detect liquid leaks in a system
Control of media mixing ratios
Control of liquid levels
Note
230V high and low level versions have a full-wave-rectified dc output which can be used to directly drive small relays or solenoids (maximum inrush 20VA), and built-in time delays to avoid spurious switching.
Gerelateerde Links
- Tempatron SLX Series Liquid Level Sensor Level Sensor NO-Rated, Housing ABS
- WIKA Level Probe Model LH-10 Series level sensor Level Probe Housing Fluorinated Ethylene Propylene
- TE Connectivity LL-01 Series Ultrasonic Liquid Level Switch Level Sensor NO-Rated
- Schneider Electric Harmony Series Probe Level Probe NO-Rated, Housing Steel
- WIKA LS-10 Series level sensor Level Probe NO-Rated, Housing Stainless Steel
- WIKA LH-10 Series level sensor Level Probe Housing Fluorinated Ethylene Propylene
- WIKA LH-10 Series level sensor Level Probe NO-Rated, Housing Stainless Steel
- SICK LFP0300 Series TDR Level Sensor Level Sensor NO-Rated, Housing Plastic Polybutylene Terephthalate