SICK C2MT Series Light Curtain Receiver, Sender, 34 mm Resolution

RS-stocknr.:: 701-2956
Fabrikantnummer:: C2MT-07834BBC03FE0
Fabrikant:: SICK

Subtotaal (1 eenheid)*

€ 587,78

(excl. BTW)

€ 711,21

(incl. BTW)

GRATIS bezorging voor bestellingen van meer dan € 90,00

Op voorraad

2 stuk(s) klaar voor verzending vanaf een andere locatie

Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.

Aantal stuks	Per stuk
1 +	€ 587,78

*prijsindicatie

RS-stocknr.:: 701-2956
Fabrikantnummer:: C2MT-07834BBC03FE0
Fabrikant:: SICK

Specificaties

Datasheets

Wetgeving en compliance

Productomschrijving

Zoek vergelijkbare producten door een of meer kenmerken te selecteren.

Alles selecteren	Attribuut	Waarde
	Merk	SICK
	Product Type	Light Curtain
	Series	C2MT
	Beam Resolution	34mm
	Component Type	Receiver, Sender
	Safety Type	Type 2
	Standards/Approvals	ACMA, CE, cUL, EC-Type-Examination, GB, GB/T, IEC, Moroccan, OSHA, RoHS, UKCA, cULus
	Protective Height	780mm
	Maximum Supply Voltage	24V dc
	Maximum Protective Width	8m
	Minimum Scanning Distance	0μm
	Maximum Scanning Distance	8m
	Height	780mm
	Width	15mm
	Length	32mm
	Maximum Response Time	13ms
	Terminal Type	5-Pin M12

	Alles selecteren
	Merk SICK
	Product Type Light Curtain
	Series C2MT
	Beam Resolution 34mm
	Component Type Receiver, Sender
	Safety Type Type 2
	Standards/Approvals ACMA, CE, cUL, EC-Type-Examination, GB, GB/T, IEC, Moroccan, OSHA, RoHS, UKCA, cULus
	Protective Height 780mm
	Maximum Supply Voltage 24V dc
	Maximum Protective Width 8m
	Minimum Scanning Distance 0μm
	Maximum Scanning Distance 8m
	Height 780mm
	Width 15mm
	Length 32mm
	Maximum Response Time 13ms
	Terminal Type 5-Pin M12

Land van herkomst:: DE

SICK C2MT Series Light Curtain, 780mm Protective Height, 8m Maximum Scanning Distance - C2MT-07834BBC03FE0

This light curtain is a safety receiver intended for presence detection and hazardous-area protection in industrial automation. It operates as a standalone unit or as the final device in cascaded systems, providing optical synchronisation without a separate sync line. The device is designed for machine safety applications where an unobtrusive, narrow-profile sensor is required and is compatible with standard safety relay integration and hard-wired configuration.

Features and Benefits:

• 13ms maximum response time for prompt hazard interruption
• 34mm beam resolution to detect small intrusions reliably
• 24V DC supply for straightforward plant power integration
• Optical synchronisation allowing simplified multi-device cascades
• 5-pin M12 system connection for secure plug-in wiring

Applications

• Suitable for safeguarding machine access openings
• Ideal for conveyor line intrusion detection
• Used with safety relays for restart interlock implementations
• Can be used for packaging machinery presence sensing
• Suitable for integration into multi-device cascade systems

What supply voltage range does it accept?

It accepts 24V DC with an operating range of 19.2V DC to 28.8V DC.

How is the device protected against environmental conditions?

The housing meets IP65 for dust and water resistance and tolerates -20°C to +55°C operating temperatures.

What outputs are provided for safety control?

It provides PNP semiconductor OSSD outputs that are short-circuit protected and cross-circuit monitored, each capable of ≤300mA.

How is the device mounted and delivered?

It is supplied with C-Fix and L-Fix brackets, a twin-stick system plug, and a test rod matching the beam resolution.

Which certifications cover its conformity and approvals?

Approvals include CE, UKCA, cUL, cULus, EC-Type-Examination and various national declarations.

Note

Two identical miniTwin-stick packages MUST always be ordered for a complete system.,Cable: Each miniTwin is supplied with an M12 5-pin 1-way system plug. To cascade 3 pairs you will need 2 x cascade cables. Either 701-2962 for miniTwin up to 540mm or 701-2971 for miniTwin over 600mm. These cascade cables have 2 x plugs and should be attached to the rear of your middle pair of miniTwin. The cascade extender cable 701-2974 can be used in conjunction with the 2 x cascade cables to increase the distance between miniTwin if required. Regardless of whether you use these devices stand-alone or in a 2 x pair or cascade format you will need to purchase 2 x M12 5-pin connector cable eg 523-0335.,Brackets: 2 x C-Fix and 2 x L-Fix brackets are supplied with each miniTwin. To mount (stand-alone only) as a flat installation on a profile frame or in a machine niche purchase optional O-Fix brackets 701-2978