ABB Light Curtain Passive Part, 3 Beam(s)

RS-stocknr.:: 920-9622
Fabrikantnummer:: 2TLA022306R1100 Orion3-4-M2C-080
Fabrikant:: ABB

ABB Light Curtain Passive Part, 3 Beam(s)

Bekijk alle Light Curtains

Subtotaal (1 eenheid)*

€ 422,38

(excl. BTW)

€ 511,08

(incl. BTW)

GRATIS bezorging voor bestellingen van meer dan € 90,00

Tijdelijk niet op voorraad

Verzending vanaf 15 oktober 2026

Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.

Aantal stuks	Per stuk
1 +	€ 422,38

*prijsindicatie

RS-stocknr.:: 920-9622
Fabrikantnummer:: 2TLA022306R1100 Orion3-4-M2C-080
Fabrikant:: ABB

Specificaties

Datasheets

Wetgeving en compliance

Productomschrijving

Zoek vergelijkbare producten door een of meer kenmerken te selecteren.

Alles selecteren	Attribuut	Waarde
	Merk	ABB
	Product Type	Light Curtain
	Component Type	Passive Part
	Safety Type	4
	Standards/Approvals	E
	Number of Beams	3
	Protective Height	800mm
	Maximum Protective Width	65mm
	Minimum Scanning Distance	0.5m
	Maximum Scanning Distance	8m
	Height	56.9mm
	Width	52mm
	Length	880.5mm
	Terminal Type	8-Pin M12

	Alles selecteren
	Merk ABB
	Product Type Light Curtain
	Component Type Passive Part
	Safety Type 4
	Standards/Approvals E
	Number of Beams 3
	Protective Height 800mm
	Maximum Protective Width 65mm
	Minimum Scanning Distance 0.5m
	Maximum Scanning Distance 8m
	Height 56.9mm
	Width 52mm
	Length 880.5mm
	Terminal Type 8-Pin M12

Land van herkomst:: IT

ABB Orion3 Light Grids

The Orion3 light grids from ABB combine both the transmitter and receiver in a single unit, called the active unit. The beams are then reflected using a mirror called the passive unit, which reduces cabling because it is not connected. The Orion3 is available in two options, a base model and an extended model.

Features and Benefits

No more functions or settings than necessary

A local reset button can be connected directly to the light grid: no need for cable between the reset button and the electrical cabinet or for an extra control module

Each light grid can monitor the actuators without any extra control module (EDM function)

Less cabling because only the active unit is connected

Alignment help and a wide angle within the limits of a Type 4 device facilitate alignment

Rotation brackets simplify alignment too

M12 connectors speed up cabling

Since the alignment level is displayed on the unit, the alignment can be improved before an unwanted stop occurs

Extensive error indication reduces troubleshooting time

Muting sensors are connected directly to the extended model, with no need for a remote muting module

Body detection, 2 to 4 beams

Up to 8 m operating distance

Sturdy profile

Applications

For body detection

When power is available on only one side

When a sturdy profile is necessary

Perimeter and Access Guard

Note

Both the base and extended models provide detection, local reset and external device monitoring (EDM), but the extended model also provides muting.

Approvals

CE, cULus, TUV.

Standards

EN ISO 13849-1:2008 PL e, Cat 4
EN 61508-1..4:2010 SIL3
EN 62061:2005/A1:2013 SIL CL 3