- RS-stocknr.:
- 832-6521
- Fabrikantnummer:
- K4671BRC
- Fabrikant:
- MK Electric
tijdelijk niet op voorraad – nieuwe voorraad verwacht op 12-06-2024, met een levertijd van 2 à 3 werkdagen.
Toegevoegd
Prijs Per stuk
€ 24,32
(excl. BTW)
€ 29,43
(incl. BTW)
Aantal stuks | Per stuk |
1 - 9 | € 24,32 |
10 - 24 | € 21,89 |
25 + | € 20,67 |
- RS-stocknr.:
- 832-6521
- Fabrikantnummer:
- K4671BRC
- Fabrikant:
- MK Electric
Datasheets
Wetgeving en compliance
- Land van herkomst:
- GB
Productomschrijving
10A Flush Switches
The MK Electric Albany Plus range of plate switches features stylish curved design, the switches are manufactured from the finest materials and maintain their high quality appearance for years to come. These MK switches do not have to be derated when used with fluorescent or inductive loads. The terminals in the back of these plate switches have a funnel entrance and are upwards facing, to make installation easier. The Albany Plus decorative switches will look great in both contemporary and classic interiors.
10A Plateswitches
Flush mount
Can be wired as either one way or two ways
Flush mount
Can be wired as either one way or two ways
Standards
BS EN 60669-1: 2000
Standards
BS3676 (Part 1: 1989)
MK Albany Plus Range
Manufactured from the finest materials and coated with a special heat-cured powder lacquer finish. The Albany Plus range is highly scratch resistant maintaining its subtle good looks for many years and adding that touch of class to the finest decor.
3-pin operated safety shutter on all sockets
In-line terminals which are top facing enable wires to be cut to same length and allow easy screwdriver access
All screws are backed out and captive for ease of installation One screwdriver fits all products
Double pole switches on all products
Neutral contact makes first and breaks last for added safety
Minimum 3mm contact gap for safe switch isolation
Fuse carrier can be padlocked in open position for safe maintenance
In-line terminals which are top facing enable wires to be cut to same length and allow easy screwdriver access
All screws are backed out and captive for ease of installation One screwdriver fits all products
Double pole switches on all products
Neutral contact makes first and breaks last for added safety
Minimum 3mm contact gap for safe switch isolation
Fuse carrier can be padlocked in open position for safe maintenance
Specificaties
Kenmerk | Waarde |
---|---|
Number of Gangs | 1 |
Light Switch Type | Rocker Light Switch |
Number of Ways | 2 |
Current Rating | 10A |
Mount Type | Flush |
Series | Albany Plus |
Finish | Brushed |
Length | 86mm |
Fixing Standard | BS Standard |
Number of Modules | 1 |
Height | 86mm |