STMicroelectronics L6574, Lighting Ballast Driver Half Bridge, 16.6V 16-Pin, PDIP

Datasheets
Wetgeving en compliance
Conform
Productomschrijving

PWM Controllers, STMicroelectronics

Pulse-width modulator (PWM) controllers can support isolated and non-isolated AC-DC and DC-DC switch mode power supplies. They are based on the most popular topologies in both single-ended, such as fly-back, forward or quasi-resonant controllers, and double-ended configurations, such as asymmetrical half-bridge, for Switch Mode Power Supplies (SMPS).
The PMW controllers also integrate a comprehensive set of protections for enhanced robustness and reliability.

PWM (Pulse Width Modulation) Controllers, STMicroelectronics

Specificaties
Kenmerk Waarde
Driver Configuration Inverting, Non-Inverting
Driver Type High and Low Side
Number of Drivers 2
Bridge Type Half Bridge
Reference Voltage 600V
Package Type PDIP
Mounting Type Through Hole
Pin Count 16
Maximum Operating Voltage 16.6V
Minimum Operating Voltage 10V
tijdelijk niet op voorraad – nieuwe voorraad verwacht op 17-03-2020, met een levertijd van 2 à 3 werkdagen.
Prijs Each (In a Tube of 30)
1,617
(excl. BTW)
1,957
(incl. BTW)
Aantal stuks
Per stuk
Per tube*
30 - 120
€ 1,617
€ 48,51
150 - 270
€ 1,294
€ 38,82
300 +
€ 1,229
€ 36,87
*prijsindicatie
Related Products
Linear Technology product series of synchronous and non-synchronous ...
Description:
Linear Technology product series of synchronous and non-synchronous internal switching regulator ICs offer high efficiency plus a wide input voltage range and switching frequencies up to 4MHz.The controllers span over several types of configurations from buck (step-down), boost (step-up), buck-boost, ...
The MIC33153 is a high-efficiency 4MHz 1.2A synchronous ...
Description:
The MIC33153 is a high-efficiency 4MHz 1.2A synchronous buck regulator with an internal inductor, HyperLight Load® mode, Power Good (PG) output indicator, and programmable soft start. HyperLight Load® provides very high efficiency at light loads and ultra-fast transient response which ...
Description:
The NCP1593 is a fixed 1 MHz, high output current, synchronous PWM converter that integrates a low-resistance, high-side P-channel MOSFET and a low-side N-channel MOSFET. The NCP1593 utilizes internally compensated current mode control to provide good transient response, ease of ...
The BD9227F is a 20V, 1A non-synchronous PWM ...
Description:
The BD9227F is a 20V, 1A non-synchronous PWM duty control buck converter with an integrated internal high-side 20V Power MOSFET. Operating frequency is 1.0MHz fixed by inner circuit. Current mode control with internal slope compensation simplifies the external compensation calculation ...