Telemecanique Sensors XCMH Series Roller Plunger Limit Switch, 1 NO/1 NC, IP67, IP66, Plastic Housing, 240V ac, 0.75A

RS-stocknr.:: 194-142
Fabrikantnummer:: XCMH2102L5
Fabrikant:: Telemecanique Sensors

Telemecanique Sensors XCMH Series Roller Plunger Limit Switch, 1 NO/1 NC, IP67, IP66, Plastic Housing, 240V ac, 0.75A

Subtotaal (1 eenheid)*

€ 60,30

(excl. BTW)

€ 72,96

(incl. BTW)

GRATIS bezorging voor bestellingen van meer dan € 90,00

Op voorraad

56 stuk(s) klaar voor verzending vanaf een andere locatie

Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.

Aantal stuks	Per stuk
1 +	€ 60,30

*prijsindicatie

RS-stocknr.:: 194-142
Fabrikantnummer:: XCMH2102L5
Fabrikant:: Telemecanique Sensors

Specificaties

Datasheets

Wetgeving en compliance

Productomschrijving

Zoek vergelijkbare producten door een of meer kenmerken te selecteren.

Alles selecteren	Attribuut	Waarde
	Merk	Telemecanique Sensors
	Actuator Type	Roller Plunger
	Product Type	Limit Switch
	Contact Configuration	1 NO/1 NC
	IP Rating	IP67, IP66
	Housing Material	Plastic
	Contact Type	Snap Action
	Switching Current	0.75A
	Terminal Type	Cable
	Series	XCMH
	Switching DC Voltage	250V dc
	Minimum Operating Temperature	-25°C
	Switching AC Voltage	240V ac
	Maximum Operating Temperature	70°C
	Standards/Approvals	CSA C22.2 No 14, UL 508, IEC 60947-5-1, IEC 60204-1
	Width	30mm
	Depth	70.4mm
	Length	16mm
	Hazardous Area Certification	No
	Mechanical Life	5000000Cycles
	Operating Force	35N

	Alles selecteren
	Merk Telemecanique Sensors
	Actuator Type Roller Plunger
	Product Type Limit Switch
	Contact Configuration 1 NO/1 NC
	IP Rating IP67, IP66
	Housing Material Plastic
	Contact Type Snap Action
	Switching Current 0.75A
	Terminal Type Cable
	Series XCMH
	Switching DC Voltage 250V dc
	Minimum Operating Temperature -25°C
	Switching AC Voltage 240V ac
	Maximum Operating Temperature 70°C
	Standards/Approvals CSA C22.2 No 14, UL 508, IEC 60947-5-1, IEC 60204-1
	Width 30mm
	Depth 70.4mm
	Length 16mm
	Hazardous Area Certification No
	Mechanical Life 5000000Cycles
	Operating Force 35N

Datasheet - XCMH2102L5

Land van herkomst:: ID

Telemecanique Sensors XCMH Series Limit Switch, IP67/IP66 Ingress Protection, 0.75A Switching Current - XCMH2102L5

This limit switch is a compact mechanical device designed to provide reliable position detection in industrial systems. It employs a roller plunger actuator housed in a plastic enclosure with protection against dust and water ingress, and is intended for installations where a small footprint and straightforward cable connection are required.

Features and Benefits:

• Snap-action contacts deliver quick switching response
• Rated switching at 250V DC for low-voltage DC control
• 240V AC switching capability supports AC control circuits
• Contact current handling of 0.75A for small loads
• Operating force of 35N ensures positive actuation
• Mechanical endurance of 5,000,000 cycles for long service life

Applications

• Used for end-of-travel detection on automated conveyors
• Suitable for position sensing on industrial doors
• Ideal for monitoring linear actuators in machines
• Can be used for safety interlocks on guards and hatches
• Used with small motors and relays in control panels

What contact arrangements are available and how do they operate?

The device provides one normally open and one normally closed contact in a snap-action configuration, enabling both make and break signalling from a single actuator stroke.

How is the switch wired into a control system?

The unit features a cable terminal for direct cable connection to control circuitry, allowing straightforward installation without separate terminal blocks.

What environmental temperatures can it tolerate during operation?

It operates reliably within a range from -25°C up to 70°C, suitable for many indoor and sheltered outdoor industrial environments.

What approvals support its use in industrial equipment?

It meets recognised standards including CSA C22.2 No 14, UL 508, IEC 60947-5-1 and IEC 60204-1 for electrical safety and industrial control compatibility.