Telemecanique Sensors XCMH Series Spring Lever Limit Switch, 1 NO/1 NC, IP67, IP66, Plastic Housing, 240V ac, 0.75A

RS-stocknr.:: 194-150
Fabrikantnummer:: XCMH2107L1
Fabrikant:: Telemecanique Sensors

Telemecanique Sensors XCMH Series Spring Lever Limit Switch, 1 NO/1 NC, IP67, IP66, Plastic Housing, 240V ac, 0.75A

Subtotaal (1 eenheid)*

€ 49,90

(excl. BTW)

€ 60,38

(incl. BTW)

GRATIS bezorging voor bestellingen van meer dan € 90,00

Tijdelijk niet op voorraad

Verzending vanaf 30 oktober 2026

Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.

Aantal stuks	Per stuk
1 +	€ 49,90

*prijsindicatie

RS-stocknr.:: 194-150
Fabrikantnummer:: XCMH2107L1
Fabrikant:: Telemecanique Sensors

Specificaties

Datasheets

Wetgeving en compliance

Productomschrijving

Zoek vergelijkbare producten door een of meer kenmerken te selecteren.

Alles selecteren	Attribuut	Waarde
	Merk	Telemecanique Sensors
	Actuator Type	Spring Lever
	Product Type	Limit Switch
	IP Rating	IP67, IP66
	Contact Configuration	1 NO/1 NC
	Housing Material	Plastic
	Contact Type	Snap Action
	Switching Current	0.75A
	Terminal Type	Cable
	Series	XCMH
	Minimum Operating Temperature	-25°C
	Switching DC Voltage	250V dc
	Switching AC Voltage	240V ac
	Maximum Operating Temperature	70°C
	Width	30mm
	Standards/Approvals	CSA C22.2 No 14, IEC 60204-1, IEC 60947-5-1, UL 508
	Length	16mm
	Depth	168mm
	Hazardous Area Certification	No
	Mechanical Life	5000000Cycles
	Operating Force	0.1N

	Alles selecteren
	Merk Telemecanique Sensors
	Actuator Type Spring Lever
	Product Type Limit Switch
	IP Rating IP67, IP66
	Contact Configuration 1 NO/1 NC
	Housing Material Plastic
	Contact Type Snap Action
	Switching Current 0.75A
	Terminal Type Cable
	Series XCMH
	Minimum Operating Temperature -25°C
	Switching DC Voltage 250V dc
	Switching AC Voltage 240V ac
	Maximum Operating Temperature 70°C
	Width 30mm
	Standards/Approvals CSA C22.2 No 14, IEC 60204-1, IEC 60947-5-1, UL 508
	Length 16mm
	Depth 168mm
	Hazardous Area Certification No
	Mechanical Life 5000000Cycles
	Operating Force 0.1N

Datasheet - XCMH2107L1

Land van herkomst:: ID

Telemecanique Sensors XCMH Series Limit Switch, IP67 Ingress Protection, 0.75A Switching Current - XCMH2107L1

This limit switch provides reliable position sensing for industrial machinery, delivering low-force actuation and electrical switching in demanding settings. It is designed for use where compact form, environmental resistance and recognised safety standards are required, offering snap-action contacts and a cable outlet for straightforward integration into control circuits.

Features and Benefits:

• Spring lever actuator reduces required operating force to 0.1 N
• Snap-action contacts enable fast, repeatable switching at mating points
• 1 NO/1 NC arrangement permits simple changeover control functions
• Rated for 250V DC switching to support DC control loads
• Withstand switching at 240V AC up to 0.75A for AC circuits
• Mechanical endurance tested to 5,000,000 cycles for long service life

Applications

• Suitable for detecting machine door or guard positions
• Ideal for monitoring linear actuator end stops
• Used with conveyor indexing systems for position feedback
• Can be used for safety interlocks in access panels
• Suitable for control circuits in small automation units

What environmental protection does it offer for dusty or wet sites?

The enclosure meets IP67 and IP66 degrees of protection allowing temporary immersion and strong water jets respectively, supporting operation in wet, dusty or wash-down conditions.

What materials and terminal type are provided for wiring?

The body is formed from a robust plastic material and electrical connection is via a factory-fitted cable outlet for sealed cable entries.

What temperature range can it operate within?

It is rated to function across an ambient span from -25 °C up to 70 °C for use in cold starts and warm process areas.

Which safety and industrial standards govern its design?

It conforms to IEC 60947-5-1 and IEC 60204-1 and holds approvals to CSA C22.2 No. 14 and UL 508, covering electrical safety and machine control requirements.