Telemecanique Sensors OsiSense XC Series Roller Lever Limit Switch, 1 CO, IP65, Metal Housing, 240V ac, 3A

RS-stocknr.:: 199-282
Fabrikantnummer:: XC2JC10111
Fabrikant:: Telemecanique Sensors

Telemecanique Sensors OsiSense XC Series Roller Lever Limit Switch, 1 CO, IP65, Metal Housing, 240V ac, 3A

Subtotaal (1 eenheid)*

€ 229,40

(excl. BTW)

€ 277,57

(incl. BTW)

GRATIS bezorging voor bestellingen van meer dan € 90,00

Op voorraad

Plus verzending 14 stuk(s) vanaf 21 september 2026
Plus verzending 8 stuk(s) vanaf 06 oktober 2026

Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.

Aantal stuks	Per stuk
1 +	€ 229,40

*prijsindicatie

RS-stocknr.:: 199-282
Fabrikantnummer:: XC2JC10111
Fabrikant:: Telemecanique Sensors

Specificaties

Datasheets

Wetgeving en compliance

Productomschrijving

Zoek vergelijkbare producten door een of meer kenmerken te selecteren.

Alles selecteren	Attribuut	Waarde
	Merk	Telemecanique Sensors
	Actuator Type	Roller Lever
	Product Type	Limit Switch
	Contact Configuration	1 CO
	IP Rating	IP65
	Housing Material	Metal
	Contact Type	Snap Action
	Switching Current	3A
	Terminal Type	Screw Clamp
	Series	OsiSense XC
	Switching AC Voltage	240V ac
	Switching DC Voltage	250V dc
	Minimum Operating Temperature	-25°C
	Maximum Operating Temperature	70°C
	Length	183mm
	Depth	65mm
	Standards/Approvals	CSA, RoHS, UL, VDE, IEC, REACH
	Width	40mm
	Hazardous Area Certification	No
	Operating Force	0.3Nm
	Conduit Entry	1 Cable Gland
	Mechanical Life	30000000Operations

	Alles selecteren
	Merk Telemecanique Sensors
	Actuator Type Roller Lever
	Product Type Limit Switch
	Contact Configuration 1 CO
	IP Rating IP65
	Housing Material Metal
	Contact Type Snap Action
	Switching Current 3A
	Terminal Type Screw Clamp
	Series OsiSense XC
	Switching AC Voltage 240V ac
	Switching DC Voltage 250V dc
	Minimum Operating Temperature -25°C
	Maximum Operating Temperature 70°C
	Length 183mm
	Depth 65mm
	Standards/Approvals CSA, RoHS, UL, VDE, IEC, REACH
	Width 40mm
	Hazardous Area Certification No
	Operating Force 0.3Nm
	Conduit Entry 1 Cable Gland
	Mechanical Life 30000000Operations

Vrijgesteld

Land van herkomst:: FR

Telemecanique Sensors Osizense XC Series Limit Switch, IP65, 0.3Nm Operating Force - XC2JC10111

This limit switch is a roller‑lever actuator device designed for position sensing in industrial automation. It provides snap‑action switching for control circuits and is built to withstand typical plantroom environments while delivering repeatable contact operation for machinery and equipment monitoring.

Features and Benefits:

• Snap‑action contact ensures Rapid and reliable switching behaviour
• Metal enclosure provides robust protection against mechanical hazards
• IP65 ingress rating permits wash‑down and dusty environments
• 3 A switching capacity supports moderate control loads up to 250V DC
• 30 million operation mechanical life reduces maintenance frequency
• Operating range from -25 °C to 70 °C suits varied temperature conditions

Applications

• Suitable for conveyor end‑of‑travel detection in manufacturing lines
• Ideal for actuator position sensing in pneumatic systems
• Used for safety interlocks on access panels and guards
• Can be used for limit detection on packaging machinery

What type of contacts does it use and how do they behave?

It employs a single changeover contact with instantaneous snap‑action to provide clear state transitions for control logic.

How is wiring terminated for field installation?

Electrical connection is via screw‑clamp terminals and a single cable‑gland conduit entry for secure cable retention.

What actuator torque is required to operate the device?

The roller lever requires an operating torque of 0.3 N·m to initiate switching, allowing precise actuation from moving parts.

Which approval standards are applicable for deployment in industrial settings?

It meets multiple international standards and approvals including CSA, UL, VDE, IEC, RoHS and REACH.